Interested to Buy Any Domain ? << Click Here >> for more details...
Topic :: Pressure
CHEMICAL MATERIAL BALANCE - EXAMPLE 2.5 : In a non-dilute absorber, the inlet gas stream consists of 8 mol % carbon dioxide in nitrogen. By contact with room temperature water at atmospheric pressure, 65 % of the carbon dioxide from a gas stream has been removed. (a) Find the mole ratio of carbon dioxide and nitrogen gases at inlet and outlet gas streams. (b) The Henry's Law provides y = 1640 x for carbon dioxide in water. Find the mole ratio when x = 0.0000427. Mole ratio is y / (1 - y) for y.
1 2485CHEMICAL MATERIAL BALANCE – EXAMPLE 2.6 : According to Raoult's law for ideal liquid, x (PSAT) = yP where x is mole fraction of component in liquid, y is mole fraction of component in vapor, P is overall pressure and PSAT is saturation pressure. A liquid with 60 mole % component 1 and 40 mole % component 2 is flashed to 1210 kPa. The saturation pressure for component 1 is ln (PSAT) = 15 - 3010 / (T + 250) and for component 2 is ln (PSAT) = 14 - 2700 / (T + 205) where PSAT is in kPa and T is in degree Celsius. By assuming the liquid is ideal, calculate (a) the fraction of the effluent that is liquid; (b) the compositions of the liquid and vapor phases. The outlet T is 150 degree Celsius.
1 2708CHEMICAL FLUID MECHANIC - EXAMPLE 3.1 : Water flows through a pipe with circular cross sectional area at the rate of V / t = 80 L / s where V is the volume and t is time. Let Av = 80 L / s where A is cross sectional area and v is velocity of fluid. For point 1, the radius of the pipe is 16 cm. For point 2, the radius of the pipe is 8 cm. Find (a) the velocity at point 1; (b) the velocity at point 2; (c) the pressure at point 2 by using Bernoulli's equation where P + Rgy + 0.5 RV = constant. P is the pressure, R = density of fluid, V = square of fluid's velocity, g = gravitational constant of 9.81 N / kg and y = 2 m = difference of height at 2 points. The pressure of point 1 is 180 kPa.
1 2456Question 82 - (a) The Hyperion sewage plant in Los Angeles burns 8 million cubic feet of natural gas per day to generate power in United States of America. If 1 metre = 3.28084 feet, then how many cubic metres of such gas is burnt per hour? (b) A reservoir of natural gas produces 50 mole % methane and 50 mole % ethane. At zero degree Celsius and one atmosphere, the density of methane gas is 0.716 g / L and the density of ethane gas is 1.3562 mg / (cubic cm). The molar mass of methane is 16.04 g / mol and molar mass of ethane is 30.07 g / mol. (i) Find the mass % of methane and ethane in the natural gas. (ii) Find the average density of the natural gas mixture in the reservoir at zero degree Celsius and one atmosphere, by assuming that the gases are ideal where final volume of the gas mixture is the sum of volume of the individual gases at constant temperature and pressure. (iii) Find the average density of the natural gas mixture in the reservoir at zero degree Celsius and one atmosphere, by assuming that the final mass of the gas mixture is the sum of mass of the individual gases. Assume the gases are ideal where mole % = volume % at constant pressure and temperature.
1 2656Pressure tx shows 1 mbar but we need 1000 mbar at this process condition .. how can we sort it out .
1654How to regulate the flow of Air in 4" line, with max flow of 330 nm3/hr and Pressure of 0.5 bar? please suggest the type of instrument required.
1449Can any body help me out by telling hoe swelling pressure test of soil is carried out ? some body told me the procedure & formula (change in length /116.3*100%) but still i am confused ? pls help.
1895THERMODYNAMIC - EXAMPLE 10.1 : The water is superheated steam at 440 degree Celsius and 17.32 megapascals. Estimate the enthalpy of the steam above. From the steam table for water at 440 degree Celsius, enthalpy of steam, h at 18 megapascals is 3103.7 kilojoules per kilogram and at 16 megapascal is 3062.8 kilojoules per kilogram. Assume that h = mP + c where P is pressure; m and c are constants at fixed temperature with small differences in P.
1 2198THERMODYNAMIC - EXAMPLE 10.3 : According to Raoult's law, the pressure when vapor is completely condensed, P = x(1) P(1) + x(2) P(2) ... + x(n) P(n) when x(1), x(2) ... x(n) are the mole fractions of component 1, 2 ... n and P(1), P(2) ... P(n) are the vapor pressures of component 1, 2 ... n. A vapor at 74 degree Celsius containing 70 mole % water and 30 mole % ethanol is to be completely condensed. At the temperature of 74 degree Celsius vapor pressure is 0.38 atm for water and 0.97 atm for ethanol. What is the minimum pressure the compressor must be operated?
1 2124CHEMICAL ENERGY BALANCE - EXAMPLE 11.1 : Please match the term A - E with the stated definition i - v. Terms : A. Yield. B. Selectivity. C. Relative saturation. D. Molal saturation. E. Absolute saturation. Definitions : i. (moles of desired product formed) / (moles that would have been formed if there were no side reactions and the limiting reactant has reacted completely); ii. (moles of desired product formed) / (moles of undesired product formed); iii. (relative humidity 40 % means partial pressure of water vapour equals 4 / 10 of the vapour pressure of water at the system temperature); iv. (moles of vapour) / (moles of vapour dry gas); v. (mass of vapour) / (mass of dry gas).
1 2135CHEMICAL ENERGY BALANCE - EXAMPLE 11.2 : Calculate the cooling duty, H required to condense and cool acetone from 100 degree Celsius to 25 degree Celsius at atmospheric pressure. The heat of vaporization for acetone at its normal boiling point is 30.2 kJ / mol. The boiling point of acetone at atmospheric pressure is 56 degree Celsius. The flowrate of acetone through the condenser is 100 mol / s = N. Value of sensible heat needed to increase the temperature of acetone in liquid form from 25 to 56 degree Celsius is 4.06 kJ / mol. Value of sensible heat needed to increase the temperature of acetone in vapor form from 56 to 100 degree Celsius is 3.82 kJ / mol. Unit of H is kJ / s.
1 2300
Calculate how much oxygen is dissolved in 100 milliliters of blood if the blood is exposed to a partial pressure of oxygen of 120 torr?
please provide me the calculation for the thickness of duplex stainless steel pipeline thickness used in process industry ( Water). The details are given below. Diameter : 3" and 4" Thickness : 3.91mm, SCH40 Operating pressure : 62 bar Operating Temp : 35 degree ASME31.3
How to calculate flow of water delivered by pump when pressure & size of pipe line is given
If Nasa where to sink a large tube down a few miles into one of the deepest parts of the ocean or a spiral tube not so deep. Then fit electromagnetic monorail running gear to a sledge and then put a space cargo vehicle inside the sledge. With ball valves to compartmentalise the tube off to keep a constant pressure with inert gases as the space shuttle accelerates using electromagnetism to gain altitude and then loses the sledge. Next fires it's main rocket engines to carry on up to space. Would this idea work and would it save money on fuel if the space cargo vehicles where only say 5 ton cargo holds. Also they could be reusable with their rocket engines.
please post answers as fast as you can i am in a urgent need for an i nterview in a fashion company. 1. Briefly describe your ideal job? 2. Why did you choose this career? 3. What goals do you have in your career? 4. How do you plan to achieve these goals? 5. Can you work well under deadlines or pressure? 6. Tell us about a time when you failed to meet a deadline.What were the repercussions? 7. Do you have reference list? 8. Why do you want to work here? 9. Why should we hire you over the others waiting to be interviewed? 11. How soon can you travel down to start your new Job?
what is the procedure to callibrate temp controller ,pressure controller,etc. suppose a temp controller showing error 1.5 degree centigrate how can i minimize it.
1)what to do in emergency situation of having total blackout (on a ship) 2)what to do in emergency situation of flooding in the engine room 3)under what conditions would engine room bilges be pumped overboard? 4)why is high pressure required for the injection of fuel into the cylinder of diesel engine. 5)why is doubled walled pipes employed for high pressure fuel lines? 6)reasons for overheating of main engine 7)how to detect choked fuel valve,leaky piston rings and their remedies during operation in diesel engine? 8)effects of insufficient or excessive cylinder lubrication? 9)causes of a diesel engine piston overheating.
Giraffe in Arabic means "the highest of all." The height of a giraffe is an average of 5 m, its mass is about 800 kg and hooves is an area of approximately 625 cm2. Using a straw from a material nedeformabil a giraffe trying to drink water from a lake, not to condescend. What is the ratio of the minimum pressure to be applied giraffe, mouth, at the end paiului to drink water and pressure of giraffe on the ground. The density of water. g = 10 m/s2
What is the pressure in co2 cartridge in a DCP 5 kg extinguisher.
What is critical pressure ?. What will happen if water is heated above critical pressure and temperature?. What importance it is having related to Boiler?. Upto what presrure natural circulation is possible in Boilers?.
MY generator water cooler inlet line height - 11 mtr inlet water line height - 7 mtr water come into the line from overhead tank, O/H tank height - 20 mtr the first tapping in the inlet line is 2" line which down to 4 mtr level plateform., second tapping in inlet water line goes to a pump 6" line installed at 4 mtr level plateform, pump capacity 200m3/hr, head- 30 mtr, hp-40. the outlet of pump of 6" water line connected to a header of 6 mtr long of 6" line, on this header the six tapping are connected, 4 nos. 3" line goes to 11 mtr height water cooler the pressure of the line is 0.15 to 0.25 kg/cm2, 2" and 4" pipe line connected to a cooler at 4 mtrlevel plateform. my question is, at 11 mtr height level the quantity of water and flow is not sufficient for my cooler, the temp. of cooler is rises much more. you are requested to suggest the modification of pipe line/ pump for take more water flow and pressure (desired pressure is 1 kg/cm2)
If you have a valve with an applied pressure, how do you determine the stress to the closed and open valve?
If you have a fuel valve with a pressure applied, what is the stress to the open and closed valve?
CAN WORK WELL UNDER DEAD LINES OR PRESSURE?
In a Furnace arch pressure is more than Hearth pressure,then how flue gas travels to stack
