Design a counter for the following binary sequence: 0,4,5,3,1,6,2,7 and repeat

Design a counter for the following binary sequence:
0,4,5,3,1,6,2,7 and repeat. Use JK flip-flops.

Question Posted / guest

3 Answers
21706 Views
IIIT, Infotech, University, UNW, I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

Design a counter for the following binary sequence: 0,4,5,3,1,6,2,7 and repeat. Use JK flip-flops..

Answer / lakshadip

(a) Design a counter with the following repeated binary
sequence:
0, 1, 2, 3, 4, 5, 6, 7, 8 using JK Flip Flop.

Is This Answer Correct ?

64 Yes

29 No

Design a counter for the following binary sequence: 0,4,5,3,1,6,2,7 and repeat. Use JK flip-flops..

Answer / lakshadip

(b) Draw a pipeline configuration to carry out the
following task:
(Ai + Bi + Ci + Di) (Ei – Fi). List the contents
of all the registers in the pipeline for i = 1 through 6.

Is This Answer Correct ?

19 Yes

22 No

Design a counter for the following binary sequence: 0,4,5,3,1,6,2,7 and repeat. Use JK flip-flops..

Answer / mahender

# A short CI column of hollow circular section has
projecting bracket carrying a load of 10 tonnes. The load
line is off the column by 20cm. The external diameter of
the column is 350mm and thickness of metal is 25 mm. Find
the maximum stress intensity in the section.
# A rectangular beam section of 300 mm width and 500 mm
effective depth is reinforced with 4 bars of 20 mm diameter,
what shear reinforcement is required to resist 200 kN shear
(use working stress method).
# A bar of steel 24 mm in diameter was subjected to a
tensile load of 60 kNs and measured extension on a 20-cm
gauge length was 0.009 cm and the change in diameter was
0.00375 cm. Calculate the Bulk modulus?
# What is the allowable load carrying capacity of a circular
column section of 400 mm diameter reinforced with 6x25 mm
diameter bars adequately tied with spirals? Consider
concrete of grade M25 and steel of grade

Is This Answer Correct ?

3 Yes

9 No

Post New Answer

More Engineering AllOther Interview Questions

Can anyone tell me the exact formulae with explanation for the questions related to cube which is asked for CTS? I have seen varieties of formulae in different sites.I need the exact on... So pls help me out!!!

0 Answers CTS,

consiteunts of indian railways

0 Answers Indian Railways,

A bar of steel 24 mm in diameter was subjected to a tensile load of 60 kNs and measured extension on a 20-cm gauge length was 0.009 cm and the change in diameter was 0.00375 cm. Calculate the Bulk modulus?

0 Answers

how to implement spiral model on railway reservation?.

1 Answers

draw the diagram of double earthing

0 Answers

is the meter head is same as back pressure?

0 Answers GDex,

what is the need for oobs

0 Answers

Box 1 cotain odd value X or Y the box 2 =X i.e 7 or 12 box 3= Y has value 19 if X is 7 or 31 if x is 12 get even value X or Y Use any operator steps allowed 3.

0 Answers

what are the main points to be included in our introduction when asked in hr...??

0 Answers

. There are two water tanks A and B, A is much smaller than B. While water fills at the rate of 1 liter every hour in A, it gets filled up like, 10, 20, 40,80, 160…..in tank B. (At the end of first hour, B has 10 liters, second hour it has 20 liters and so on). If tank B is 1/32 filled of the 21 hours, what is total duration of hours required to fill it completely?

3 Answers TCS,

What experience have you had in writing technical materials?

0 Answers Finolex,

What is the difference between a gun and a rifle and what advantage does a spinning bullet have?

0 Answers

For more Engineering AllOther Interview Questions Click Here