What is Diff. btw Cat-5 & Cat-6 Network Cables???
Answers were Sorted based on User's Feedback
Answer / mior
Comparison of the Network Cable
Cat 3: Transmission characteristics specified up to 16MHz
for 100ohm balance cable
Cat 4: Transmission characteristics specified up to 20MHz
for 100ohm balance cable
Cat 5e: Transmission characteristics specified up to 100MHz
for 100ohm balance cable
Cat 6: Transmission characteristics specified up to 250MHz
for 100ohm balance cable
Cat 7: Transmission characteristics specified up to 600MHz
for 100ohm balance cable
Hopes it might help..
Mior
www.Guide4ElectricalConsultant.com
| Is This Answer Correct ? | 4 Yes | 0 No |
Answer / ravi
Cat-5 is a 4 Pair Cable
Cat-6 is a 5 Pair Cable...
| Is This Answer Correct ? | 3 Yes | 6 No |
WHAT IS THE CURRENT CARRYING CAPACITY OF 2.5/3 CORE HI TUFF CABLE,WILL IT SAFLEY CARRY 8.6 AMPS OVER 120 METRES,CAN YOU ALSO ANSWER WITH FORMULA FOR WORKINGS OUT ,THANK YOU 3RDYR APPRENTICE.
What are diffrent type of road taxes?
If one tertiary phase i.e. R,Y or B is earthed of a loaded type tertiary delta connected (Without load)of a power auto transformer, what is its advantage/disadvantage?
how earth resistance can be improved in dry soil
what is difference between armoured cable and un armoured cable
Capacitor is load free component but why ampere meter shows current when capacitor bank breaker close?
How can i run three phase bore well motor in 2 phase while i running it by using capacitor its ams increase to 23 ams the distance from motor to stater is 1600 feet
i have installed my solar site of 6.7kw and is working perfectly , can somebody tell me that how can i measure my solar irradiation kw/day/sq m ?
what is excitation system explain in detail with its working?
explain why core loss of a transformer is almost constant under different load conditions when connected across a constant voltage and constant frequency.
0 Answers MPPGCL Madhya Pradesh Power Generating Company Ltd,
For polarity test on a 11/3.3kV 2.5MVA delta-star Unit Auxiliary transformer,415V 3-phase supply was applied at the HV. Connection between Aa was made with a 2.5mm cable. As soon as power was switched on the cable caught fire and burnt. This test was then abandoned. It is noteworthy to say that a similar cable was also used in a similar transformer for the same. The cable did not burn and test was successfully completed with good result. What is wrong? Please, help me out.
how to design domestic earthing pit and earthing wiring?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)