Question 1
A low-level format received by a floppy disk does what?
a. Adds a root directory
b. Includes a FAT (File Allocation Table)
c. Stores 720K
d. Creates a structure of sectors, tracks, & cluster.
Question 2
A user is complaining of problems. You find that upon
startup, the IBM machine give two beeps alerting you to a
POST error. Error code 301 shows. What is wrong with this
machine?
a. There is a monitor error.
b. There is a keyboard error.
c. This is not a POST error. Two beeps indicates a
motherboard error.
d. There is a serial card error.

Question 3
What is this an example of?

A. A 30-pin SIMM
B. A 72-pin SIMM
C. A 168-pin DIMM
D. C-RIMM
Question 4
Bridges are capable of which?
a. Expanding the length of a network segment.
b. Acting as a firewall.
c. Segmenting networks.
d. Communication of computers on a LAN.
Question 5
Which is true of a female DB 15-pin video port?
a. It has 2 rows of 5 pinholes.
b. It has 3 rows of 5 pinholes.
c. It has one row of 8 pinholes and one row of 7 pinholes
d. It has one row of 6 pinholes and one row of 9 pinholes
Question 6
You have just installed two hard drives into the same
machine. One is set up as the slave and both are on the same
IDE channel. You notice that the drive's LED light is
constantly lit on the slave drive. What do you need to do to
fix this?
a. Troubleshoot the slave drive by reconfiguring the slave
to be the master, removing the original master drive, then
rebooting.
b. Disable the secondary controller in the BIOS.
c. Manually enter the drive settings on the BIOS.
d. Install more memory.
Question 7
SVGA and Ultra VGA are two distinct video standards. True or
False?
a. True.
b. False.
Question 8
SVGA is represented by all of the following resolutions except:
a. 1600 x 1200
b. 800 x 600
c. 640 x 480
d. 1280 x 1024
Question 9
Which is true of an Active Matrix LCD?
a. The LCD is divided into two halves.
b. The LCD is divided into two halves.
c. Each pixel is constantly refreshed.
d. The pixels are fixed.
e. It uses more electricity.
f. None of the above.

Question 10
What are the correct stages and order of the EP laser
printing process?
a. Cleaning, Writing, Conditioning, Developing, Fusing,
Transferring, and End of Cycle
b. Cleaning, Conditioning, Writing, Developing,
Transferring, Fusing, & End of Cycle
c. Erasing, Writing, Heating, Developing, Fusing,
Transferring, & End of Cycle
d. Conditioning, Erasing, Writing, Developing, Fusing,
Transferring, & End of Cycle

Question 11
Choose the correct associations (pick 2).
a. 802.4 – Internetworking
b. 802.6 - Metropolitan area network
c. 802.9 - Integrated voice and data networks
d. 802. 11 - Token ring LAN
Question 12
What is the function of a Layer 2 switch ?
a. forwards data based on logical addressing
b. duplicates the electrical signal of each frame to every port
c. learns the port assigned to a host by examining the
destination MAC address
d. determines which interface is used to forward a frame
based on the destination MAC address.
Question 13
An administrator would like to connect ten workstations on
a 192.168.0.0/24 network. The device selected by the
administrator must allow connectivity between hosts without
sharing bandwidth.
Which device would be appropriate?
a. Hub
b. Router
c. Switch
d. Repeater
Question 14
Which devices are primarily used to extend cable segments
within a collision domain by
regenerating the data signals? (Choose two.)
a. switch
b. repeater
c. router
d. bridge
e. hub


Question 15
Which networking devices use the MAC address to make
forwarding decisions? (Choose two.)
a. NIC
b. bridge
c. hub
d. switch
e. repeater

Software :

1. Briefly describe the data type conversion feature of
Oracle SQL and PL/SQL.
2. What is INDEX? Describe its benefits.
3. Write down the name of five most popular RDBMS.
4. What is UML? Write some Diagram name.
5. What is HTML and XML?
6. What is CSS and AJAX and their benefits?
7. What is software quality assurance?
8. Describe components of a typical test plan?
9. What is the difference between QC and QA?
10. What is Verification and Validation?
11. What diff b/w black box and white box testing?
12. What is the difference between System Testing,
Integration Testing & System Integration Testing?


ATI Limited
Question Paper
Duration Time : 1 Hour and 30 Minutes
Question 1
A low-level format received by a floppy disk does what?
a. Adds a root directory
b. Includes a FAT (File Allocation Table)
c. Stores 720K
d. Creates a structure of sectors, tracks, & cluster.
Question 2
A user is complaining of problems. You find that upon
startup, the IBM machine give two beeps alerting you to a
POST error. Error code 301 shows. What is wrong with this
machine?
a. There is a monitor error.
b. There is a keyboard error.
c. This is not a POST error. Two beeps indicates a
motherboard error.
d. There is a serial card error.

Question 3
What is this an example of?

A. A 30-pin SIMM
B. A 72-pin SIMM
C. A 168-pin DIMM
D. C-RIMM
Question 4
Bridges are capable of which?
a. Expanding the length of a network segment.
b. Acting as a firewall.
c. Segmenting networks.
d. Communication of computers on a LAN.
Question 5
Which is true of a female DB 15-pin video port?
a. It has 2 rows of 5 pinholes.
b. It has 3 rows of 5 pinholes.
c. It has one row of 8 pinholes and one row of 7 pinholes
d. It has one row of 6 pinholes and one row of 9 pinholes
Question 6
You have just installed two hard drives into the same
machine. One is set up as the slave and both are on the same
IDE channel. You notice that the drive's LED light is
constantly lit on the slave drive. What do you need to do to
fix this?
a. Troubleshoot the slave drive by reconfiguring the slave
to be the master, removing the original master drive, then
rebooting.
b. Disable the secondary controller in the BIOS.
c. Manually enter the drive settings on the BIOS.
d. Install more memory.
Question 7
SVGA and Ultra VGA are two distinct video standards. True or
False?
a. True.
b. False.
Question 8
SVGA is represented by all of the following resolutions except:
a. 1600 x 1200
b. 800 x 600
c. 640 x 480
d. 1280 x 1024
Question 9
Which is true of an Active Matrix LCD?
a. The LCD is divided into two halves.
b. The LCD is divided into two halves.
c. Each pixel is constantly refreshed.
d. The pixels are fixed.
e. It uses more electricity.
f. None of the above.

Question 10
What are the correct stages and order of the EP laser
printing process?
a. Cleaning, Writing, Conditioning, Developing, Fusing,
Transferring, and End of Cycle
b. Cleaning, Conditioning, Writing, Developing,
Transferring, Fusing, & End of Cycle
c. Erasing, Writing, Heating, Developing, Fusing,
Transferring, & End of Cycle
d. Conditioning, Erasing, Writing, Developing, Fusing,
Transferring, & End of Cycle

Question 11
Choose the correct associations (pick 2).
a. 802.4 – Internetworking
b. 802.6 - Metropolitan area network
c. 802.9 - Integrated voice and data networks
d. 802. 11 - Token ring LAN
Question 12
What is the function of a Layer 2 switch ?
a. forwards data based on logical addressing
b. duplicates the electrical signal of each frame to every port
c. learns the port assigned to a host by examining the
destination MAC address
d. determines which interface is used to forward a frame
based on the destination MAC address.
Question 13
An administrator would like to connect ten workstations on
a 192.168.0.0/24 network. The device selected by the
administrator must allow connectivity between hosts without
sharing bandwidth.
Which device would be appropriate?
a. Hub
b. Router
c. Switch
d. Repeater
Question 14
Which devices are primarily used to extend cable segments
within a collision domain by
regenerating the data signals? (Choose two.)
a. switch
b. repeater
c. router
d. bridge
e. hub


Question 15
Which networking devices use the MAC address to make
forwarding decisions? (Choose two.)
a. NIC
b. bridge
c. hub
d. switch
e. repeater

Software :

1. Briefly describe the data type conversion feature of
Oracle SQL and PL/SQL.
2. What is INDEX? Describe its benefits.
3. Write down the name of five most popular RDBMS.
4. What is UML? Write some Diagram name.
5. What is HTML and XML?
6. What is CSS and AJAX and their benefits?
7. What is software quality assurance?
8. Describe components of a typical test plan?
9. What is the difference between QC and QA?
10. What is Verification and Validation?
11. What diff b/w black box and white box testing?
12. What is the difference between System Testing,
Integration Testing & System Integration Testing?












Question 1 A low-level format received by a floppy disk does what? a. Adds a root directory b. ..

Answer / nilesh patel

i need answer of all que

Is This Answer Correct ?    8 Yes 1 No

Post New Answer

More Engineering AllOther Interview Questions

What is the difference betweem scrum model,xp model and fdd model?

1 Answers  


send me e-mail on dell tech question papers 2011 -2012

0 Answers   DELL,


Is unit testing possible or even desirable in all circumstances?Provide example to justify your answer.

0 Answers  


if Papers-5,Pens-3,Pencils-2, Brought for 105Rs.Then Papers-10,Pens-7,Pencils-5.Then what is the cost of a Single Pen?

1 Answers   APGenco,


How do aeroplanes fly? Why can some fly up-side down?

0 Answers  






whether we can implement VPN based on UDP? If yes then tell how? If no tell why not?

0 Answers  


In HSE what is Lost time accident? why it is to be reported within 48 hrs to gov.authorities ?

0 Answers  


Some question are asked from computers also. How we calculate sum in Excel? can we find cube root in Excel if yes , how? If i want to send excel sheet to 10 different person, how i can send it ( don`t tell me by mailing) condition given by interviewer.If A=.03rs(tsqr), value of r increase by 50%, s by 30% & t decrease by 20%. find value of A. If two coins having dia 25 & 16 they are rotate in their axis , Coin having dia 25 reach a point at x per sec, in how many min coin having dia 16 reach that place, Both are rotating in same direction.

0 Answers   NTPC,


What are daemon Threads?

0 Answers   Impetus,


what are macros?what are its advantages and disadvantages in c language?

2 Answers  


write a program to print only the largest number between elements of an 1-d array?

1 Answers  


Given a passport size photo draw vertical and horizontal lines and mark the intersection points(assume one for the photo and zero for the background).Give the intersection points(1 or 0) to program and print "." for input 1.

1 Answers  


Categories
  • Civil Engineering Interview Questions Civil Engineering (5085)
  • Mechanical Engineering Interview Questions Mechanical Engineering (4452)
  • Electrical Engineering Interview Questions Electrical Engineering (16637)
  • Electronics Communications Interview Questions Electronics Communications (3918)
  • Chemical Engineering Interview Questions Chemical Engineering (1095)
  • Aeronautical Engineering Interview Questions Aeronautical Engineering (239)
  • Bio Engineering Interview Questions Bio Engineering (96)
  • Metallurgy Interview Questions Metallurgy (361)
  • Industrial Engineering Interview Questions Industrial Engineering (259)
  • Instrumentation Interview Questions Instrumentation (3014)
  • Automobile Engineering Interview Questions Automobile Engineering (332)
  • Mechatronics Engineering Interview Questions Mechatronics Engineering (97)
  • Marine Engineering Interview Questions Marine Engineering (124)
  • Power Plant Engineering Interview Questions Power Plant Engineering (172)
  • Textile Engineering Interview Questions Textile Engineering (575)
  • Production Engineering Interview Questions Production Engineering (25)
  • Satellite Systems Engineering Interview Questions Satellite Systems Engineering (106)
  • Engineering AllOther Interview Questions Engineering AllOther (1379)