why do we use c class of ip address(192 range) in
organizations?
- 8 Answers
- 20794 Views
- Symantec, I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
Answer / bhisham
Bcoz C class Ip address Range used for commercial ip rage
and private ip range thats why
| Is This Answer Correct ? | 28 Yes | 13 No |
Answer / venkatesh
mainly in local area using private ips, 192.168.x.x is a
private ip. not only
private ip range is -10.x.x.x
-169.254.x.x
- 172.16.0.0 to 172.31.255.255
thse are default private ip ranges.
| Is This Answer Correct ? | 22 Yes | 7 No |
Answer / vadiraj joish
Ip class r selected depending on the network requirement of
network(no of networks and no of hosts) and class c range is
private ip range it can be used in any lan
| Is This Answer Correct ? | 7 Yes | 1 No |
Class A ip address Range starts with 0-127 why because
inthe subnetmask 00000000 first bit is not used there fore
we are use 0-126.127 is range is used to loo
In Class B ip address range in subnetmask network field
first 2 bits are not used so next 64 ip address Range used
in B Class range is 128-191.
In Class C First 3 bits of Network bits are not used so
next 32 bits are used in Class C range is 192-224
| Is This Answer Correct ? | 3 Yes | 0 No |
Answer / pawan kumar giri
bcoz it is general user and in it ip range start
192.168.0.0 to 192.168.255.255
| Is This Answer Correct ? | 3 Yes | 3 No |
Answer / pawan kumar giri
bcoz c class of ip address generaliz used.but A or B classes
are more secure and it's used only in nasa.....
| Is This Answer Correct ? | 2 Yes | 2 No |
Answer / ahmed faran butt
Because class (A)Ip's are specified to networks with large number of total hosts. Class A allows for 126 networks by using the first octet for the network ID.
Class (B) Ip's .
This is the most widely used class by small businesses. When you look at the IP address, you'll notice that class C networks start with a first number that's between 192 and 223 (205.161.74.x for example). There can be up to 2,097,151 class C networks and each network can handle close to 254 computers.
As for D and E.... D class is used for broadcasting and E for future use.
| Is This Answer Correct ? | 0 Yes | 2 No |
Answer / diptiman srivastav
because in c class private ip ranges starts from
192.168.x.x to 192.168.10.254.254
| Is This Answer Correct ? | 3 Yes | 23 No |
What routing protocols have you configured?
Define rsa algorithm?
Which command lists versions and states of the nfs service running on a host called machine ?
You try "ping server1" and you get "no answer from server1". Why ? (assume that your machine resolved the name correctly).
Define mac addresses?
Which command will mount /usr/local from server called machine1?
Which file serves as the configuration file for sendmail ?
What does the MAC sublayer of the Data Link Layer do ? (choose all that apply) a. builds frames b. checks to see that nothing got damaged in transit by CRC c. determines "which machine goes first on the wire" d. provides path to the destination host e. Gets data on and off the wire
which port number you use when installing DHCP
27 Answers HSBC, InTarvo Technologies, Wipro,
Which command causes in.named to take a snapshot of its in-memory cached data.
When would you use a default route ?
What are the fields of VLAN tag?
0 Answers HCL, Juniper Networks,
Networking Protocols 
