What is the UDP datagram format? A. Source Port - 16 bits, Destination Port - 16 bits, Length - 16 Bits, Checksum - 16 bits, Data B. Destination Port - 16 bits, Source Port - 16 bits, Length - 16 Bits, Checksum - 16 bits, Data C. Source Port - 16 bits, Destination Port - 16 bits, Checksum - 16 Bits, Length - 16 bits, Data D. Source Port - 8 bits, Destination Port - 8 bits, Length -8 Bits, Checksum - 8 bits, Data

1 Answers  

---

Which protocol supenetting is enable by default?

0 Answers  

---

You need to come up with a TCP/IP addressing scheme for your company. Which two factors must you consider when you define the subnet mask for the network? A.) The location of DHCP servers B.) The volume of traffic on each subnet C.) The number of subnets on the network D.) The location of the default gateway E.) The number of host IDs on each subnet

1 Answers  

---

In the setup dialog, what do the square brackets indicate? A. current or default spores B. hard coded values that cannot be modified C. values entered by the administrator but not saved D. values that must be written to NVRAM before becoming enabled

1 Answers  

---

Your Ethernet interface currently has the IP address of 1.1.1.1/24. You would like it to have a second IP address of 2.2.2.2/24. Which command will do that? A.) ip address 1.1.1.1 2.2.2.2 255.255.255.0 B.) ip address 2.2.2.2 255.255.255.0 secondary C.) ip address 2.2.2.2 255.255.255.0 D.) This cannot be done, you can only have 1 IP address per physical interface. E.) ip address 2.2.2.2 /24

1 Answers  

---

Hi, I have packet tracer 5.0. I want to test intervlan routing routing. Can someone plz tell me about intervlan routing?

1 Answers  

---

What is 10baset ethernet lans?

0 Answers  

---

Which IP host address range is allowable given an IP address of 172.37.2.56 and 12 bits of subnetting A. 172.37.2.48 to 172.37.2.63 B. 172.37.2.48 to 172.37.2.62 C. 172.37.2.49 to 172.37.2.62 D. 172.37.2.49 to 172.37.2.63 E. 172.37.2.55 to 172.37.2.126

1 Answers  

---

What is VLSM? how to Calculate VLSM? where it is use and why?

13 Answers  

---

plz send me cisco contact no india?

0 Answers   3i Infotech, Cisco,

---

Which two types of route table entries are used by a Layer 3 router to determine the appropriate path to destination? (Choose two) A. static route entry B. default route entry C. Dynamic route entry D. temporary route entry E. permanent route entry

2 Answers  

---

What protocols can you use while testing Trace? A.) DECnet B.) CLNS C.) IP D.) Old Vines E.) Vines F.) Chaos

1 Answers  

---