What is the defference between Rx Lev Sub and Rx Lev Full?
What you mean by Link Budget?can you explain
- 4 Answers
- 47938 Views
- Lucent, NSN, TCS, Zong Pakistan, I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
What is the defference between Rx Lev Sub and Rx Lev Full?
Ans: Statistical observation says that an average
conversation has silence 40% of the time. When that happens,
the BTS transmits some random noise on to the channel to
save power. This, obviously, degrades the overall RxLev.
Such a level is characterized as RxLev Full. Whereas, when
no noise is induced, the level is reported as RxLev Sub.
This is the reason that RxLev Sub has a better value than Rx
Lev Full.
It was quite a terse answer, but I hope it helps.
| Is This Answer Correct ? | 64 Yes | 20 No |
Answer / avishek chowhan
Rx_Level_Full is measured when DTX is off & Sub is when DTX
is on.
RX Lev Full: Its is nothing but the Mobile transmit the
measurment report(SACCH multiframe) for every 480ms. this
multiframe containes 104 TDMA frames, in 104 TDMA frames 4
TDMA frames for Decode the BSIC and remaining 100 TDMA
frames for Average measurment of serving cell and
neighbouring cell.This average measurment of 100 TDMA frames
are RX Lev Full
RX Lev Sub: DTX is a discontinouse trasmission, When the
mobile conversation 40% of the time either Trasmitter or
Receive is idle. When DTX is ON, DTX will switch off the
Trasmitter or Receiver when they is no speech Pulses. only
few TDMA frames will trasmit, the average of this TDMA
frames is called RX Lev Sub, give you proper measurment of
RX level
| Is This Answer Correct ? | 25 Yes | 5 No |
Answer / jabirvk
when DTX is enabled rx leve sub,othewise it is rx level full....
| Is This Answer Correct ? | 23 Yes | 7 No |
Answer / agnivesh ( prithvi)
RX Lev Sub: DTX is a discontinouse trasmission, When the
mobile conversation 40% of the time either Trasmitter or
Receive is idle. When DTX is ON, DTX will switch off the
Trasmitter or Receiver when they is no speech Pulses. only
few TDMA frames will trasmit, the average of this TDMA
frames is called RX Lev Sub, give you proper measurment of
RX level
RX Lev Full: Its is nothing but the Mobile transmit the
measurment report(SACCH multiframe) for every 480ms. this
multiframe containes 104 TDMA frames, in 104 TDMA frames 4
TDMA frames for Decode the BSIC and remaining 100 TDMA
frames for Average measurment of serving cell and
neighbouring cell.This average measurment of 100 TDMA frames
are RX Lev Full
| Is This Answer Correct ? | 7 Yes | 1 No |
What do you mean by link budget?
What is the difference between cdu c and cdu a?
Which is the digital modulation used today in telecomn? (whatever his question meant the answer was CDMA) 2) Why is walse code used? then, noncoherent detection, coherent detection, Pn code(y it is used?) etc
15 Answers Reliance, Spice Telecom,
What is gos in gsm technology?
What are the various blocks in GSM architecture?
I know that the main function of bts is to air interface signaling. But why?
What is drx in gsm technology?
Give me some advantages of GSM?
Explain base band frequency hopping?
what is gsm technology?
what is GSM?
42 Answers ConnectM, Nutek, pcpl, Reliance Digital, RT Outsourcing, ZTE,
What do you mean by arfcn in gsm technology?
WiFi Protocols 
