Answer / pradeep kumar gupta

FIRST OF WE WILL TAKE A MEASURING FLASK AND A STANDARD
ROTAMETER . WE WILL FIX THE TIME AND OBSERVE THE VOLUME FOR A
GIVEN TIME FOR BOTH ROTAMETER ,IF CERTEAIN ERROR OCCURE THEN
ACCORDING TO WHICH WE WILL CALIBRATE THE GIVEN ROTAMETER .

Answer / sandeep singh

in terms of height in centimeters.

why 14.7 pound/inch2 is used in idustries as unit of pressure bcz here not sea level and not a temperature is 0C (zero degree celcius)?????????

0 Answers  

---

QUANTUM COMPUTING - EXAMPLE 32.6 : (a) Let H | 0 > = 0.707 ( | 0 > + | 1 > ), H | 1 > = 0.707 ( | 0 > - | 1 > ). Find the values for H | 0 > + H | 1 > and H | 0 > - H | 1 >. (b) In quantum computing, a qubyte is a quantum byte, or 8 quantum bits, a sequence processed as a unit. A qubit is a quantum bit. According to Alexander Holevo in his theorem, n qubits cannot carry more than n classical bits of information. What is the maximum amount of classical bits of information that can be carried by 1 qubyte.

1 Answers  

---

how does refractive index detector work?

0 Answers  

---

QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.6 : In N + 1 Rule in Quantum Chemistry, whenever a spin 1 / 2 nucleus is adjacent to N other nuclei, it is split into N + 1 distinct peaks. In 1 peak or singlet, there is only 1 magnitude. In 2 peaks or doublet, the ratio of magnitude of each peak is 1 : 1. In 3 peaks or triplet, the ratio of magnitude of each peak is 1 : 2 : 1. In 4 peaks or quartet, the ratio of magnitude of each peak is 1 : 3 : 3 : 1. In 5 peaks or quintet, the ratio of magnitude of each peak is 1 : 4 : 6 : 4 : 1. (a) By using binomial coefficients or Triangle of Pascal find the ratio of magnitude of each peak if 6 peaks exists. (b) How many adjacent nuclei are available in a spin 1 / 2 nucleus in such situation of 6 peaks?

1 Answers  

---

PROCESS DESIGN - EXAMPLE 21.3 : According to a heuristic of chemical engineering plant design, assume a pressure difference dP = 4 psi for each 10-ft rise in elevation. A pump is needed to pump liquid from a storage tank at a lower elevation to a heating tank at a higher elevation with the elevation difference of 60 ft. (a) Find the pressure loss due to such elevation. (b) If the required minimum inlet pressure to the heating tank is 9 psi, with 1 control valve is installed between pump and heating tank, what is the dP minimum required for the control valve and the entrance to the heating tank when the heuristic mentions that at least 10 psi is required for the control valve? (c) The pressure at the inlet of the pump is 8 psi and the flowrate of the liquid produces pressure head of 50 psi. What is the total pressure produced by the pump? (d) Assume a pipeline dP of 2 psi / 100 ft for liquid flow in a pipe according to heuristic, what is the approximate maximum length of the pipe in ft that can be installed between the pump and the heating tank?

1 Answers  

---

WHAT ARE THE DISADVANTAGE OF EXTRACTIVE DISTILLATION

3 Answers  

---

For amonia manufacturing process if pressure, temperature would be increase over optimum level what would be happen?And what steps should be taken?

0 Answers  

---

What is quicklime and what are the uses?

0 Answers  

---

ENGINEERING MATHEMATICS - EXAMPLE 8.1 : A local utility burns coal having the following composition on a dry basis : Carbon (C) 83.05 %, hydrogen (H) 4.45 %, oxygen (O) 3.36 %, nitrogen (N) 1.08 %, sulfur (S) 0.7 % and ash 7.36 %. Calculate the ash free composition of the coal with reference to C, H, O, N and S.

1 Answers  

---

ENGINEERING ECONOMY - EXAMPLE 7.2 : In the purchase of a machine with a period n = 8.5 years, the minimum attractive rate of return, i = 12 %, the cost P = $55000, F = $4000 is the salvage, annual maintenance A = $3500. The return of the investment or equivalent uniform annual benefit is $15000. The equivalent uniform annual cost is P (A / P, i, n) + A - F (A / F, i, n). The investment is considered acceptable only when equivalent uniform annual benefit is greater than the equivalent uniform annual cost. From the compound interest table, (A / P, i = 12 %, n = 8 years) = 0.2013, (A / P, i = 12 %, n = 9 years) = 0.1877, (A / F, i = 12 %, n = 8 years) = 0.0813, (A / F, i = 12 %, n = 9 years) = 0.0677. Prove by calculations whether the investment above is acceptable.

1 Answers  

---

what is a pschycometric chart and how to use it?

1 Answers  

---

What is a good way to get started in doing a plant-wide steam consumption analysis?

0 Answers  

---