1.Method of finding dry ingredientfor 1 m3 concrete. 2.Method of finding dry in

1.Method of finding dry ingredientfor 1 m3 concrete.
2.Method of finding dry ingredient for 1 M3 plastetr.

Question Posted / kanti@dalip

1 Answers
8223 Views
Core, MBT, I also Faced
E-Mail Answers

1.Method of finding dry ingredientfor 1 m3 concrete. 2.Method of finding dry ingredient for 1 M3 pl..

1- Quantities for 1m3qb of concreate worck
Volume of cement=1/7x1.52=0.217/0.035=6.24 Bag cement
Sand =2/7X1.5=0.428
AGGREGATE =4/7X1.5=0.857
NOTE - IT CULCUATION IS MIX -1:2:4 or m-15 BY VOLUME
- 1.52 is volume of dry concrete
- 0.035 is volume of 1 bag cement
- 7 is plus of mix concrete (1+2+4=7)
- M-5 to m-25 is mix by volume and abobe mix is
desines mix by laborotery
- If you want to cico mix it is 2% of cement weaght
- (m-5 is 1:5:10,M-7.5 is 1:4:8,M-10is 1:3:6,M-15 is
1:2:4, M-20 is 1:1.5:3,M-25 is 1:1:2)
3- Quantities far 1m3 cement mortar (wet)
- 1.3x volume of dry wet
- 1/5x1.3xy=volume of cement
- 4/5x1.3xy=sand in m3
NOTE- 5 is plus of mix (1+4=5)
1.3 is dry volume of mortar
EXAMPUL1- Please cul culate the volume mortar with thiknes
and surfashe area(10mx10mx15mm thick plaster
2- increase 20% is bulck like joints and wastage.
3- if you want 100m2 plaster =100m2x.015 mm thik
plaster=1.5 m3 mortar20% is extra of1.5m3mortar=0.3m3
Total=1.5+0.3=1.8m3 mortarIf your mix is 1:4
=1/5x1.3x1.8=0.468/.035=13.37 Bag CEMENT=4/5x1.3x1.8=1.872
m3 SAND reqd.

Is This Answer Correct ?

3 Yes

1 No

Post New Answer

More Mechanical Engineering Interview Questions

which power station plants r more efficient? which is less? which is most expensive and which is cheapest?

0 Answers

what is bearing?

8 Answers L&T,

why have u choose this ME-engg design department

0 Answers US Consulate,

Why should we hire you over the others waiting to be interviewed?

0 Answers

In order to derive the torsional formulas what are the assumptions taken?

0 Answers

sir, i am going to appear in the test of BEML 2009 so i want to get the type of question paper asked in previous exams of BEML.

0 Answers

How do we calibrate the pressure transducer on the disharge line above our compressors? Or should it need calibrating?

1 Answers

Which pipe should I use SAW, ERW or seamless if I have the following constraints I have to transport methane gas Size is 8” Corrosive environment Sulphide is present Also tell the cost comparison

0 Answers SMEC,

What is the significant of ZERO degree kelvin ? why it is not possible to achieve it?

2 Answers Tech Mahindra,

What is meaning of bearing nos.?

4 Answers Grasim, IOCL, L&T, Sharp Ferro Alloys,

Explain how does hydraulic clutches work?

0 Answers

T union support factor

0 Answers

For more Mechanical Engineering Interview Questions Click Here