a compressor running at 100 rpm gives 40% efficincy speed increase from 200 wt

a compressor running at 100 rpm gives 40% efficincy speed
increase from 200 wt will be the efficincy???????????

Question Posted / adityatripathi23

2 Answers
4702 Views
I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

a compressor running at 100 rpm gives 40% efficincy speed increase from 200 wt will be the efficin..

Answer / madhan

Efficieny may decrese.

Is This Answer Correct ?

10 Yes

5 No

a compressor running at 100 rpm gives 40% efficincy speed increase from 200 wt will be the efficin..

Answer / jaykumar

the efficincy incresed

Is This Answer Correct ?

2 Yes

5 No

Post New Answer

More Mechanical Engineering Interview Questions

Explain the difference between afbc, bfbc, pfbc and pcfb in regard to fluidised bed technologies.

0 Answers

how can one check wheather a gear and pinion are properly aligned or not for both running and static condition?

3 Answers NTPC, OCCL, Toyota,

draw neat sketch of pirani gauge with wheatstone bridge circuit to measure output. discuss its construction working princple

0 Answers Ksb,

Greetings This question is about hydraulics and I request an expert to answer it. A simple hydraulic machine is made up of two heads, a larger one with a larger force inside a wider pipe and a smaller one with a smaller force inside a smaller pipe in width as in the second picture on this link: http://science.howstuffworks.com/hydraulic1.htm The question is this: what happens if the smaller head and the smaller force doesn’t exist but the smaller pipe is high enough to take all the liquid? For example the larger head is 1.00 sqr metre and can go down 1.00m under a weight of 100.00kg. The cross sectional area of the smaller pipe is 0.001 sqr metre. Now when the larger head goes down 1.00m, how high the liquid from the wider pipe can go into the smaller pipe of the cross sectional area of 0.001 sqr metre? Regards

0 Answers

what is call tapits in a diesel engine.

4 Answers

I am using 500 KVA DG set but I am facing one problem that frequently radiator getting leak what will be the reason?????

0 Answers

What is the use of white metal?

5 Answers

Tell me about a suggestion you have made

1 Answers Petro Star Mount,

pleas send me the syllabus of rrb je examination(mechanical)

0 Answers RRB,

Although the secondary loop of a PWR is a closed loop but some noncondensible gases are entrained into the secondary feedwater. Write three probable sources of these noncondensible gases.

1 Answers Trinity Technologies,

WHAT IS THE DIFFERENCE BETWEEN IMPACT FORCE & SUDDEN FORCE.TELL ME WITH EXAMPLE IF YOU KNOW

2 Answers

plz send me section engg. question papper for mechanical engg.

1 Answers

For more Mechanical Engineering Interview Questions Click Here