What are the steps required to design a vapor-liquid separator or flash drum?

1093

MY generator water cooler inlet line height - 11 mtr inlet water line height - 7 mtr water come into the line from overhead tank, O/H tank height - 20 mtr the first tapping in the inlet line is 2" line which down to 4 mtr level plateform., second tapping in inlet water line goes to a pump 6" line installed at 4 mtr level plateform, pump capacity 200m3/hr, head- 30 mtr, hp-40. the outlet of pump of 6" water line connected to a header of 6 mtr long of 6" line, on this header the six tapping are connected, 4 nos. 3" line goes to 11 mtr height water cooler the pressure of the line is 0.15 to 0.25 kg/cm2, 2" and 4" pipe line connected to a cooler at 4 mtrlevel plateform. my question is, at 11 mtr height level the quantity of water and flow is not sufficient for my cooler, the temp. of cooler is rises much more. you are requested to suggest the modification of pipe line/ pump for take more water flow and pressure (desired pressure is 1 kg/cm2)

2313

What type of pump may be appropriate for a liquid near saturation, a low flow rate, and very limited npsha (net positive suction head available)?

1055

Dear sir/madam I am in final year BE chemical engineering.Which companies i can apply .Please guide me.It is very helpful for me

2192

could any one plzz give me the placement tech papers taken by iocl,and bpcl in chemical stream..... my id is.... mishra.gaurang@gmail.com

2166

I am a student of class 12. With PCMB group. But I Am not good at math. So I wanted to ask whether Chemical engineering can be a good option for me.???

1722

What is the easiest way to extract hydrogen from water and the safest way to store it?

1155

what is defferance between tubular & automotive plate battery

3972

Explain under what circumstances are vortex flowmeters the most accurate?

966

What is the most common cause of solid size segregation in bulk solid systems?

2365

Explain what particle sizes are electrostatic precipitators used to remove?

990

Is there a difference in mtd (mean temperature difference) between 'e' and 'j' (divided flow) type shell and tube heat exchangers?

1021

Hallow everybody, we want to know in a NPk fertilizer process plant (Bulk Blender) we are in doubt if use square or rectangular hopper jus to avoid the vault effect durin the flow of of raw material like Phosphorus, Potasium and zeolite..Please any advise will be appresated Isdray

4222

I will complete chemical engg next yr from a deemed university. Earlier I dropped 2 yrs after std 12th. Then I got 2 yr back while completing engg, due to reasons beyond my control. Will I face any problem while applying for job. More so not many core companies come to our collg for placement. So i want to know which all companies can I apply to get a job?

2272

What information is needed to specify a mixer?

1062