Interested to Buy Any Domain ? << Click Here >> for more details...
how we can calculate the transformer size.
- 21 Answers
- 68709 Views
- Avalon, Edison, Hyundai, I also Faced
- E-Mail Answers
Answer Posted / namit
it depends on the load.
| Is This Answer Correct ? | 144 Yes | 13 No |
Post New Answer View All Answers
What is essential to prove safe isolation of electrical circuit?
I have made a 3 phase thyristor full bridge rectifier. But at the moment it is working only for the half bridge operation. Both the half bridges are on operation separately but when i put it into full bridge operation the oscilloscope output is zero. I rechecked that the pulses are correct for each thyristor. what could be the possible reason for this?
234 MVA Generator 3 phase Short circuit current Values required? Gen set Rating-234 MVA, Gen Voltage-18kv, PF;0.8, Xdv:23.5 %, Transformer Rating-18/380KV, 680MVA,Yndd1 two winding, Step up TR, ZT:35.50 %,X/R 4.33 Gen CB Position, CB open ,Disconnected open, Generator Running Voltage 18 Kv, Bi mistakes generator side earth switch Closed during that time short circuit current level in 3 Phase required, and how to test on site 234MVA Generator Short circuit current,
What is the universal motor?
75 kw motor take 45 amp in no load delta in star 10 amp but in load it will take 160 amp but IR velue of winding above 500 at 1kw ph to earth and ph to ph. what problem it should be?
WHAT IS THE PARTIAL DISCHARGE TEST?
what is the minimum requirement gigaohms for the insulation test using 5kv in 300mm xlpe cable
Under wat condition statcom operates as an inductor for the transmission line?
What is different between Difnit time and instatous over current relay
What is transister define the transister ammiter ,base, colector.
what is difference between line differential and transformer differential?
sir, 3phase induction motor takes different pf and different KW in three phase while running,explain reason
What happens to voltage when current is zero?
What are the roles and responsibilities of electrical engineer in cement plant
What does the letter CTNM in negative phase sequence relay means?
