Interested to Buy Any Domain ? << Click Here >> for more details...
what split ratio in gas chromatography.
- 9 Answers
- 50266 Views
- Cipla, Glochem, I also Faced
- E-Mail Answers
Answer Posted / piyush
I am using gc now days when sample volume increase peak area increase and width of peak increase and finally it reduce purity of our sample . So how we can judge how much sample we have to take for good result?
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
In IR spectra, generally a molecule vibrates without apply emr or ir light?
In rs method development when we are going area normalization method to dilute standard method?
Why use only methanol,used determinationof moisture content not use other solvents
In GC calibration,what is the procedure to calibrate the TCD (thermal counductivity detector)suggest ?
why multimedia dissolution require to do?
function of detecter in hplc ,gc and spectroscopy? function of carrier gas in gc?
While performing TOC sst analysis Zero shift disabled & sample analysis zero shift enabled why?
What is the principle of Thermal conductivity detector and FID?
What is the acceptance criteria for moisture balance when calibrated with sodium sulfate
what is mean by covalidation
how many types of balance calibration test?
using gradient pressure in gas chromatography are not ?using gradient pressure why
is it nessesary to do solution stability for 7 days?
Why only Copper standard is used to calibrate Atomic Absorption spectrophotometer?
I have compare C2H2-air and C2H2-N2O flame AAS on determination calcium. Both use same range of std to plot calibration curve. (2-6ppm) When i measure the sample with phosphate, KCl and LaCl, C2H2-N2O flame give false positive result, around 0.5ppm. When i measure the sample with phosphste, KCl and EDTA. C2H2-N2O flame also give 0.5ppm false positive. But both above mentioned sample would not give false positive when measured by C2H2-air flame. What is the reason?
