Interested to Buy Any Domain ? << Click Here >> for more details...
why should be the frequency is 50 hz only why not others
like 45, 95 56 or anything ,
why should we maintain the frequency constant
if so why it is only 50
- 3 Answers
- 7226 Views
- I also Faced
- E-Mail Answers
Answer Posted / ashhad khan
first of all the reason for choosing 50 Hz or 60 Hz frequency is to minimize the loses as well as transmit power efficiently . So if we try to use 100 Hz as a frequency of our power supply it will result in to many many loses like core losses will increase drastically moreover we will require a better quality core and there are many other loses which are not accounted generally in theory problems but practically they are accounted like with more frequency there will be more interference in telecommunication lines passing near to power lines and it will induce emf in every iron part near to power lines including supporting towers.
And when we talk to drop our power supply frequency to low levels like 20 Hz or 30 Hz it again results in power loss and inefficient transmission . as with lower frequency biggest concern is noticeable flickers in lamps . Thus considering all we use 50 or 60 HZ supply.
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
Explain the process of commutation in a dc machine.
1. A bomber drops a bomb from an aircraft flying at 2000 km/hr. at an altitude of 7km. The speed at which the bomb will strike the earth would be
Consider three heater bank connected in 3 phase star with neutral.Each heater bank connected in each phase.So each phase get 230 volts supply.my question is,during balance condition, current flow in neutral or Not
Define what is power quality meter ?
What is PEC??Applications........
what is the difference between RMS & TRUE RMS VOLTAGE
How two nos. 130 kw D.C motor get synchronise using D.C drive.
Do any one know exacatly when the results for NHPC held on 8th march 09 for engineering trainees will be released ?. if so please post it, i'm eager to know it.
What is an iron loss or core loss pi?
Why have to use copper cable for local isolator to motor ?
what is per unit calculation?looking for simple and strong explanation thk u
What if the difference beween internal and exrteranal LBB?
What is bridge rectifier and explain with details
how much winding resistance of 0.75kw to 12.5kw 3ph sqwiralcage induction motor?
If i have two 3000 kW motors and the whole facility requires a 10 MVA transformer. What would be better installing two 5 MVA transformers(one for 1 motor ) or just a single 10 MVA transformer for both of them. Give reasons for your answer.
