1 Cum Brick Work CM 1: 6 - How Many Bricks ,sand,Cement
Required? Brick Size 9" 4.5" 3"
Answer Posted / nishanth
no. of bricks without mortor=504
no. of bricks with mortor=392
cement=58.75kg[1.17 bags]
sand=375kg[8.63ft cube]
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
what are the types of dimensioning?
please, what is the required bar for a column of 6mx6m the dept is 405mmx300mm,its an axially loaded ?
What materials were used to build the golden gate bridge?
How much of the strength of concrete comes from post- production curing?
2. In a container filled with each of the following materials, at a porosity of 40%, determine the upward gradient required to cause the quick condition (a) Lead shot with a G = 13.75; (b) Fibre beads with G = 2.15; (c) Sand with a G = 2.32
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
dialation means
can we use PPC for concrete wall, If yes, what is the concrete (PPC & OPC) grade for Non- load bearing concrete wall, load bearing concrete wall & for cellar retaining wall.
What sizes of stones chips are used for foundation, column and floor casting. Please answer in detail.
how to remove the quantity of metal 1 and metal 2 in concrete
Draw the cross section of a boundary wall and label its part with detailing?
writte a c prog. to acept 5 no. from consule and then display them back on consulte in ascending order
Find out Cutting Length of Steel for Right angle Triangle? Where Opposite Side 4m, Adjacent side 6m. (Assume cover 40mm)
Explain what is 1/8 on the architect ruler denotes?
How to get MEP technical,instaaltion & testing data for interview?