For 1 cu m of concrete required 1.54 Cu m times dry volume.
Pl give clarification of 1.54 factor
- 1 Answers
- 3360 Views
- RASA, Unity Infraprojects, I also Faced
- E-Mail Answers
Answer Posted / surajitg
Bulk density of green concrete i.e. mixture of WATER, cement, sand and aggregate is around 1.70 gm/cc or 1700 Kg/ Cum before compaction. So to produce 1 cum of compacted concrete we need 1.54 cum of mix volume including AIR.
| Is This Answer Correct ? | 1 Yes | 2 No |
Post New Answer View All Answers
1.what type of the rock is most suitable for wet mix macadam in construction of road? 2.what is the highest maximum dry density and optimum moisture content can be acheive by using most suitable crush rock?
sir when can we expect the AEE results and when will be the interviews sheduled please guide us in this regard thanking you
any book or article on pumped concrete.
How to find out slope footing concrete
Define What is the tallest man made structure in the world?
What is geopolymer based concrete?
What is 1/8 on the architect ruler denotes?
how to calculate steel for slab or footings?
I want to know about rolling margin of steel :- For eg. If 2nos. bundle of 8mm dia steel with17 rods each of length 12m comes to store. During testing of 1m rod of each bundle it was found that 1rod has weight .405kg/m while other has .385kg/m. Now what will happen in case of steel payment and measurement payment ? Regards,
Material calculation of cm 1:6 for 1sqm
Required concret Surface Temperature prior to coating of epoxy pain with references ASTM or ACI whatever
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
how to convert sand in Cft to Kgs
Formula of mid span bar
Describe the advantages and disadvantages of using plastic and timber fenders?
