what,s the clear cover of beam,slab,column,lintel and
foundation?
- 36 Answers
- 251700 Views
- Max Myanmar, Spar Geo Infra, Yashwant Construction, I also Faced
- E-Mail Answers
Answer Posted / sandy
As per IS 456 2000
Slab-20mm
Beam/ Column-25mm or 2xDia of Main feinforcement.Which ever is greater.
Footing- Bottom 50mm
Footing side- 50 to 75mm depend on soil condition.
Pile - same as column.
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
how to control PQI (Project Quality Index)
A doubly reinforced concrete beam is 25 cm wide and 50cm deep to the centre of tension reinforcement. The centre of compression is steel is 5cm from the compression edge. The areas of the compression and the tension steel are 10.16cm2 and 12.56 cm2 if m=18 and the bending moment at the section is 7,000,000 N-cm. Calculate the stress in concrete and steel.
Explain how you can turn off the display for dimension in CAD?
What is the maximum strength of cub compress strength in one cub testing
what will be the total emoluments for deputy surveyor in APPSC in the payband of ( 9460-27600). please give me the detailed information step wise?
Explain the Strength of brick?
Is it possible to make a feature using an overdefined sketch?
how i convert mm into standard wire guage (SWG)no.
Iwant to calculate the production of 1 labour for concrete casting which includes shuttering,scaffolding,steel fixing,concreting, deshuttering and curing in 8hours.But i am not able to determine it approximately would you pls.??
where will be the reinforcement of slab placed when there is an inverted beam and the bottom of the beam and slab are at same level ?
How many litres of water used for curing of 1000sqft of slav
How to find beam R/F cutting length
5. Two long boundary walls run parallel to each other at a center to center distance of 1 meter apart. The width and height of the first wall are 0.30 m and 2.5m respectively. While those of the second are respectively 0.18m and 3.5m. Plot the distribution of vertical stress intensity due to walls on a horizontal plane, 1m below ground level. The walls have negligible depth of foundation and are made of brick masonry (y = 19.2 kN/m cu)
Define What is aggregate?
What do we mean by partial moment release ??
