1. how much normal earth resistance in earth pits(neutral
and body earth) and transformer neutral and body earth &
panel earth.
Answer Posted / kalpesh
earthing resetens 1 ohm to 3 ohm in rainy sesion only 1 ohm &other sesion aprox 3 ohm
Is This Answer Correct ? | 9 Yes | 3 No |
Post New Answer View All Answers
why the value of k is more in shell typr transformers?
WHY SEPARATELY EXCITED MACHINE NEEDS EXCITATION BY DC SUPPLY WHY NOT BY AC
What is the feedback in the control system?
is the value of inductance depends upon the evalue of thitha in doubly excited machine?
how to copy from plc ge fanuc versamax series,all input and output, adress, and printout.
What are the necessary components of the feedback control system?
what parameters should we check to reduce the power bill
why fractional pitch winding generally used in alternators?
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
what is your majour contributions in your present job
What are stable systems?
How many double suspension hardware fittings are required on a double circuit transmission tower?
What is The Resistance Formula
advantages & disadvantages of Lagging and leading power factor .
what is meant by LCR meter? where its useful ?