Interested to Buy Any Domain ? << Click Here >> for more details...
In Transformer testing at Shop test we normally test for
vector group, open ckt.,short ckt. but what are the other
test performed for transformer once it reaches at site.For
e.g:if the transformer is dry having rating 1000KVA?
- 2 Answers
- 4472 Views
- I also Faced
- E-Mail Answers
Answer Posted / brahma
Also Double voltage double frequency, if customer ask impulse
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
what happens to the supply voltage if there is any change in frequency?
what causes contact chatter when there is no demand on the air conditioning unit?
WHAT IS THE FORMULA FOR CALCULATING CURRENT RATING(DIRECT IN GROUND OR AIR) OF ARMOURED(XLPE) CABLE OF 4C,16Sqmm?
What it the purpose of parallel phasing transfomers??
Why does an induction generator is preffered as compared to synchronous generator in especially a wind energy power production project?
We have 250 KW x 2 motors, which are load from 25% to 100% varying load in every minute , so how can we compansate the power factor. pl give your opinions on the above subject.
can we make a electric generator,which can not use any type of fuel,air,solar,gas,thermal,coal,petrol,etc and able to produce electrical energy (or self electricity generating generator)
-What should be minimum value of insulation resistance and maximum value of earth resistance at any electrical instillation and what is method of testing the same.
How to do cable earhing? whether by grounding Armour to ground or by running extra G.I wire along with cable? which one is preferred mostly amoung them? If the second one is more preferable how many GI wires to be run along with cable (1 or 2)?
Do Phase angle measurement have any application in freq/harmonics measurement? If so how?
I'm generating a pulse of 3V with frequency 80Hz (12.5ms time period) and pulse duration 0.125ms and feeding it to a transformer since i want the pulse to get amplified around 60V. At the output amplification s happening but the pulse is changed to a spike, can you tell me what could be the reason? (an ordinary transformer 220V-12V stepdown transformer is reverse connected ie. now it is 12V-220V stepup and voltage amplification happens)
how we findout a ignater is faulty or not?
If we have 11 kv RYB Phase single core cable near about. Then wht effect and losses
How can we find out LT UG cable fault (size,from-4*25mm sqr to 4*300mm sqr)? How mani types UG cable faults?
What are linear and non-linear systems?
