what,s the clear cover of beam,slab,column,lintel and
foundation?
- 36 Answers
- 254168 Views
- Max Myanmar, Spar Geo Infra, Yashwant Construction, I also Faced
- E-Mail Answers
Answer Posted / g. sabarish
Above somebody says, that it depends upon exposure conditions at currently,it's correct
but normally for
slab=20mm
column=50mm
beam=40mm
lintel=15mm
| Is This Answer Correct ? | 1 Yes | 6 No |
Post New Answer View All Answers
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
what should be RCC material i.e iron rod(mm)x cement x stone x sand for laying of slab L 42'x B 22'x tk 0.375ft = 1nos & column of H 17'x15"x8" 2nos.
What is the strength of 1:6:12 mix?
who to find building iron rod strenth
Can anybody help by describing each and every step in short, used while giving a building layout by total station? Regards
Why are steel plates inserted inside bearings in elastomeric bearings?
I measured pcc work as 15.34 m cube , the ratio is 1:5:10 ,want to know the cement, sand and metal used for pcc measured as 15.34 m cube at this ratio.
1.How much batten required for 1 sqm Shuttering. 2.how much pipe & clamps required for staging of 100 sqm shuttering at 5.0 m height.
Hi all, please guide me about the volume. And percentage. Of steel fibre to be used. My project. Is Sifcon.
what is high type road and low type roads
What is the exception critarea of cube?
What is alternate bid?
will fix foundation bolts at site with out template is there any procedure?
How many square meter can mason layout chb per hour
cement, sand, aggregate,reinforcement & concrete consumption per square feet in multi storeyed building
