Interested to Buy Any Domain ? << Click Here >> for more details...
What is mean A32 B32 C32 D32 in mcb(miniature circuit breaker)
- 2 Answers
- 47119 Views
- I also Faced
- E-Mail Answers
Answer Posted / sudipto jena
hello,this is sudipto,from rourkela
In the above question ,there is a alphabet and then two
digits are present in the code.The digits are for current
carrying capacity. Here the mcb can carry 32 A of ac current
safely.
Now the alphabet stands for the type of mcb, taking
overloading and tripping time of mcb in account.
A for 1.5 to 2 times of overload current and tripping time
about 70 ms
B for 3 to 5 times of overload current and tripping time
about 50-60 ms
C for 5 to 10 times of overload current and tripping time
about 35-45 ms
D for 10 to 15 times of overload current and tripping time
about 20 ms
Generally for residential wiring we use D type for the
purpose of protecting from short ckt fault.
| Is This Answer Correct ? | 38 Yes | 6 No |
Post New Answer View All Answers
HELLO EVERYONE, I RECENTLY HAVE FOUND ONE PROBLEM, I WAS TAKING NO LOAD TRIAL OF AN HT MOTOR 920 MOTOR , 1440 RPM , 6.6 KV, WITH AUTO TRANSFORMER. AT 450 V, LOAD WAS 40 AMP AND SPEED WAS 250 RPM. BUT AS WE INCREASE VOLTAGE FROM 450 TO 480V, LOAD BECOME 41 AND SPEED REDUCED TO SOME RPM . SO WHICH PHENOMENON ACTED HERE FOR REDUCING SPEED.?? AND IS IT HAPPENING ALWAYS OR IT IS RARE? I ALSO HAVE FACED SUCH PROBLEM WITH FEW LT MOTOR ALSO.
What is the de rating factor of cable? What is the importance of the de rating factor in cable select
what is 3rd Harmonics? how it is generated in alternator
Differenciate between circuit wiring and sub main wiring with illustrations
WHAT R THE SAFETIES IN A HIGH TENSION PANEL N LOW TENSION PANEL. ALSO WAT SAFETIES R THERE IN A 200 KVA TRANSFORMER?
How many types of instrument cables are there?
What do you mean by cogeneration? What its working principle?
EXPLAIN THE TRANSFORMER MAINTENANCE?
how to remover corona effect and hysteresis losses from contactor
HOW TO TEST A LIGHTENING ARREST ER ?
what is the effect of connecting three phase supply lines to three phase auto transformer output terminals through a fuse of 10Amp and a circuit breaker (MCB). Is this connection permanently destroy the transformer?
11KV AND 22KV NETWORK KW CAPACITY IN RING AND RADIAL?
What is the basic principal, by which DC voltage level is increased more than the supplied AC voltage during conversion. As upto AC level it is contorrled by firing anlge but after maximum level how is it possible.Please clear picture. OR we have to supply the higher level AC?
Why different Pressure switch used in marine boiler water circulation system
How to know any size of cable if there are not written on cable? Answer must be theurical not by experience.
