Interested to Buy Any Domain ? << Click Here >> for more details...
Anybody know how to create a ladder programme for power
switch in TV remote without using counter... ie TV can be
turn on and turn off using single push button switch... on
pressing the switch first time TV turn on and hold the on
state till i press the switch again, and after TV turn off.
- 2 Answers
- 4723 Views
- I also Faced
- E-Mail Answers
Answer Posted / karthick
It works in the flip flop control...
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
Explain PID, ON/OFF, Controls
i am from instrument branch i want paper patern of mahagenco . any pevious years paper regarding my branch send me please . please.....
Specific gravity.
Which types of quections asked in interview for FORMULATION PLANT (PHARMA)
dear sir we have insatlled positioner model no.sipart PS2 make Siemens at our control valves . now problem is if we want to increase the response of valve opening speedy /fast. what parameters do we change for positioner ? any idea. please guide us.
What is the difference between working pressure and calibration pressure of a control valve
give some question relative instrument fitter?
What is modbus?
can anyone tel the syllabus or previous year question paper for BHAVINI(EIE)2014.
What is critcal speed. what is resonant frequency. why we want to cross crtcal speed on higher RPM (early).
I m appointed as an automation trainee engineer in small firm in that I am only the one , my company give me a project on s7-200 as i m beginner I don't know how to program so please send me the helpful site so that I complete my project before deadline....please help me out in this critical situation.
1. what is modbus cable? 2. what kind of communication we are using for the interface of DCS, ESD and Third party cabinets? 3. What is serial communication and peer to peer communication?
what is compensation? temprature & pressure
What types of Instrumentation Related Questions can an Interviewer ask in a Telephonic Interview ?
