Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / karunakaran
For Beams sides only 1 day
For coloumns 1 day
For slabs span<4.50m 7 days
For slabs span>4.50m 14 days
| Is This Answer Correct ? | 14 Yes | 0 No |
Post New Answer View All Answers
HDPE pipe standard bends using for TSE irrigation? is it possible to use 30 degree?
how to workable concrete cube test M-25 design mix
what is density of 20mm coarse aggregate.plz send answer my below adress e.mail
why development length = 50D . why not 100D
what is the use of water bar in water tank and is this an extra item in estimate?
2. In a container filled with each of the following materials, at a porosity of 40%, determine the upward gradient required to cause the quick condition (a) Lead shot with a G = 13.75; (b) Fibre beads with G = 2.15; (c) Sand with a G = 2.32
In cement concrete how to check a quality of material also proportion of material at site ?
if dia of inner circle is 42 m and depth is 1.5 m and width is 1 m ,then whait is the quantity of steel?
Explain the benefits of using standard terminology in the measurement process?(Tendering and estimation)
Rate analysis for construction of a solid block masonary of size 400x200x200 in C.M.1:5 in superstructure .Compressive strength 5.00 N/Sq.mm Confirming to IS: 12894:1990, with necessary scaffolding, raking of joints and pointing the same. I require rate per Cum.
if a pipe those configuration (ASTM c 76 class b 450mm dia 2500mm length) fixing for water course those lining of water is 7000 running meter. my question is that if 8 joints of pipe ls leakage and we have not permission to stop the water so which treatment we apply on joint in that in condition.
In Rcc ratio calculation I wanted to know quantity of Steel also.
What are the advantages of cad software’s?
3. A vane 12.5 cm long, 8.8 cm dia was pressed into a soft clay at the bottom of borehole. Torque was applied and the value at failure was 55 N-m. find the shear strength of the clay on a horizontal plane.
HOW TO CLACULATE CEMENT AND SAND CONSUMPTION FOR THE STAIRCASE KOTA FLOORING IN THE RATIO OF 1:4 50 MM THICKNESS
