Interested to Buy Any Domain ? << Click Here >> for more details...
How to calculate the quantity of water in cement mortar eg.
CM 1:3?
- 3 Answers
- 7377 Views
- I also Faced
- E-Mail Answers
Answer Posted / agilan.v
to calculate quantity of water you need to know water cement ratio... 1(cement):3(sand). we cant find w/c ratio from proportions... normally w/c ratio ranges from 0.4 to 0.7. first we have fix w/c ratio to calculate proportion value.
| Is This Answer Correct ? | 9 Yes | 4 No |
Post New Answer View All Answers
Cut Linten (RCC-1:2:4)on 10" wall - what should be the width and hight of cut Linten? Secondly, 1 X 1.6 foot,4" thick window sun/rain shed (Chajja)should consume steel,Cement, sand and Stone chips?
Which IS Code/American Code applied for coupler test of steel
Define What is passive earth pressure ?
how much quantity of 1.5" nails and 2.5" nails are required for conventional formwork shuttering?
What is the mix propotion of M10,M15,M20,M25,M30,M40,M50.M60 cement content,aggrigate,sand and water ratio.
For the construction project what capital cost has to be taken in consideration?
Dear Sir What is the Contraction joint for base Slab
Prepare a Schedule for a Highrised building from starting stage to Handover?
when it is noted "JAMB SIM" what is the term "SIM" and what does it mean?
5. Two long boundary walls run parallel to each other at a center to center distance of 1 meter apart. The width and height of the first wall are 0.30 m and 2.5m respectively. While those of the second are respectively 0.18m and 3.5m. Plot the distribution of vertical stress intensity due to walls on a horizontal plane, 1m below ground level. The walls have negligible depth of foundation and are made of brick masonry (y = 19.2 kN/m cu)
Can you pl explain the procedure steps of singly and doubly reinforced beams in limit state method
How does siphoning work?
asubmerged weir is one in which the water level on the down stream side of the weir is just at the crest level below the crest level above the crest level at stamp elevation as water surface on upstream
16 questions out of 55 were from the book GUPTA N GUPTA OBJECTIVE of civil engineering. Total ques were 4 ques from hydraullics, 7 from BMC, 4 FROM SOM, 4 from soil mechanics, 6 from transportation, 5 from engineering drawing.
What is the coeffiencent Friction Angle between Steel and Ashphalt?
