Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / gunasekhar
the resistance offered by earth to absorb the high voltages and body shocks of electrical equipment. it ranges from 0.5-5 ohms.
| Is This Answer Correct ? | 14 Yes | 0 No |
Post New Answer View All Answers
WHAT WOULD BE THE FORMULA OF WIRE GAUGE FOR A FULL LOAD CURRENT
what you have to see after one week or month from the day of installation of transformer ?
Determine a suitable number of slors and conductors per slot for the starter 1 winding of a 3 phase, 3300 V. SO Hz 300 rpm alternator. The diameter is 2.3 m
what is doid
WHY IN AC DRIVES,INPUT PHASE CURRENT SHOW UNBALANCE?
When distance between two pulleys is not fixed, the tension of belt is adjusted by a) driver shaft b) driven shaft c) adjustment screw d) belt
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
What is the power requirement of tamil nadu for one month?
I COMPLITED MY B.TECH AND 10TH CLASS WITH 70%MARKS BUT 12TH CLASS 55%MARKS..CAN I GET INDIAN RAILWAY RECUREMENT EXAMINATION?
How to calulate Locked rotor amper(LRA) for compressor type motors?
why wire sizes are 3/29 or 7/29 and why not wire sizes are 2/29 or 6/29?
33kv substation lay out details & line to line & line to earth measurements
How is the speed of a DC shunt motor related to the armature current?
List the disadvantages of constant k filters?
what is the use of the puls transformer in UPS & how it works???????????
