Interested to Buy Any Domain ? << Click Here >> for more details...
What is the difference between Relay and Contactor
- 35 Answers
- 160438 Views
- Siemens, I also Faced
- E-Mail Answers
Answer Posted / miriam
contactors has hold on contact while relays does not
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
if we install two earth pits with a clear space of 5m without any interconnection,by checking the digital multimeter will it show continuity between earth pits? If so what would be the approx. value
what does vector group Dyn11 tell us? also tell me how will u differentiate between phase lead and phase lag thru this vector group
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
How cable from Kit-Kat to main switch, from starter to motor are designed?
we have earthmat at 110KV substation.we would like to take earth resistance.b some says that by connecting earth megger terminals (C1,P1) at middile point of earthmat (at riser) will cause voltage gradient at other earthmat nods and dont get exat earth resistance.when connecting at end nods will get exat value . is it correct .please explain
Explain the method to keep noises low in a control system?
what is the function of gss in the dg set.
What does ampere turns shows?
What are merits & De-merits of State-Space Method? What is series programming, parallel programming, general programming & direct programming ? And, difference between these programmings Techniques ?
difference bewteen reverse current and alternating current
how to check regenerative load in drived motor
In diesel generator how AVR get voltage to excitation. And basic diagram DG EXCITATION CIRCUIT.
Why does an induction generator is preffered as compared to synchronous generator in especially a wind energy power production project?
Does the motor power displayed on the Motor name plate is the mechnical power motor delivers or it is consumed power from the system?
Explain the iniluencc of short circuit ratio on the pert'orniancc of synchronous machine.
