Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / vishnu vardhan singh thakur
Almost all the loads v use are of lagging loads... leading
loads are used to inject the reactive power which reduces the
lagging reactive power by which the power factor is improved
| Is This Answer Correct ? | 0 Yes | 3 No |
Post New Answer View All Answers
what is the difference between electrical and electronic choke?
how circuit breaker work.. what is the operations taking place inside a circuit breaker when an overcurrent occurs... is it similar to fuse?
I have a drawing of a wound rotor induction motor for a crane. This crane motor has 5 forward speeds & 5 reverse speed implemented of course with different amount of resistance for each speed setting selected. What has got me scratching around is the fact that 8 of the 10 speed selections switch in uneven (unbalanced) amounts of resistances on each of the 3 connections to the motor's rotor.Can this be possible? I would have assumed this would produce unbalanced rotor currents and therefore vibration in the motor. I would greatly appreciate anyone's comments on this. Many thanks, Confused.
What is NGR . What is the purpose of 10 sec ,60 sec rating of NGR.
While converting delta into star or star into delta ,the three values of resistances remains unchanged .Find out the value?Let In star R1=x;r2=x;R3=x On converting into delta,R12=x;R23=x;R31=x Find the value of x
what is the most permissible winding temp when we conducting a generator load test?(condition no load)
What is pole of the system?
if in 3-phase system voltage=440V,frequency=60Hz, current=400A. then if it is single phase then current=? and if it is single phasing then current=?
what will be the effect if you were using different brands of outlets?
what is POTT and PUTT explain?
how are reversing the direction of dc motor
Some times to change of DOR of a motor, interchange of R & B is not effected and RYB take same current, but interchange of R&Y is effected ie change the DOR. My doubt is what is the problem in motor and how it is happen.
What is value of earth resistance required for substation and equipment earthing and what are the reference guidelines
We are planning to synchronized DG's with our captive plant in the event of black start of plant, but before sync we checked voltage of DG with our plant voltage and it varies from 5 V to 450 V. So in this condition how we can sync DG with plant ?
What is called limb of a transformer?
