Interested to Buy Any Domain ? << Click Here >> for more details...
What is the lap lenth for welded joints for reinforcement
bars. and what is its IS code no.
- 5 Answers
- 34470 Views
- I also Faced
- E-Mail Answers
Answer Posted / guest
The lap length will be 10times the diameter of bar.
| Is This Answer Correct ? | 14 Yes | 10 No |
Post New Answer View All Answers
1. For 10sq.m area(47 kg bitumen contain) of 45 mm thick bitumen mix layer..how much bitumen is required for 1600 sq.m and how much aggregate need for that ?? 2. And much tonnage of bitumen mix required for 10 sq.m area of 45 mm thick. Please give answer...
according to the painting co efficient, we should take the one side of doors (or) windows or both sides?
Please design 12.5m long dubbly beam
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
what is the water-cement ratio of mix design while 30mpa in 7 days?
What is binding spacing of the rebars at lapping zones.
How to measure the requirement of cement n sand for 12mm and 20mm plastering thanks in advance
pls give me some basic informations in construction of a structure?
what is the code provision for acceptance of fineness modulus range for fine aggregates in design mix
PCC Road Min Grade M 30 for VR standard Mahatashtra load 30 KN. what should be thickness of pavement, width 4m what should be length of panel.
A sieve analysis results in 100% retained in no. 50 Sieve, the fm is?
what is the criteria for the finalisation of pavement thickness in road project?
What is aggregate?
what is right & short method of measurement of slab&beam
how many BSCs can i connect to the HUAWEI MSC
