Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / subh12168
297841.8 km/sec
| Is This Answer Correct ? | 18 Yes | 4 No |
Post New Answer View All Answers
Transformer cores are laminated in order to A simplify its construction B minimize eddy current loss C reduce cost D reduce hysterisis loss
How much minimum insulation required between 11kv/3.3kv transformer windings?
How a capacitor discharge weld power supply works? what is the use of a pulse transformer?
what happens if earth of 33kv cable is not connected to earthing pits? please send this query's answer to ngrm.sudha249@gmail.com
what is formula to cal cute earth pit numbers and size of earth strip used in earthing?
What will be the output voltage of a transformer if it is primarily energized from a square wave voltage source?
I have 4 busbar of 1000 ampere. we use 4 busbar to make 4000 ampere in one phase.my problem is that when we applied 60% load on that then busbar produced high noise.what is the reason of that and how can i minimize that noise.
hi this is hema, r there any books in particular for the preparation of the APPSC-A.E.E(electrical), if so please mail me the names ... thank u .
A 400 V, 50 Hz, Δ connected synchronous generator has a field reactance of 0.1 Ω and armature resistance of 0.015 Ω. At full load, the machine supplies 1200 A at 0.8 pf lagging. Under full-load conditions, the friction and windage losses are 40 KW and the core losses are 30 KW. What is the machine’s overall efficiency? Ignore any field circuit losses.
if a 3phase 100kva distribution transformer , 400 v,50 hz, 4-wire system is loaded at 160 k.w mostly 1-phase Lighting & Airconditioning split a.c load what will be the net effect on the power system in terms of voltage, powerfactor, current , efficiency of xformer
Why current shoots up in the secondary on the knee point voltage during saturation test of CT? How core saturation effects the secondary current (while the primary side is open)? What the logic behind this?
why u r living from presentaly working.
What is the difference IN MCCB's between thermal magnetic and electronic tripping system ?
how to calculate cable size in diffrent loads?
why connecting surge unit in contactor coil
