Answer Posted / saurabh bhardwaj (hathras)
It is basically type of how the circuit breaker operated at
sub stations
1.MOTOR CONTROLLED CIRCUIT BRAKER
2.MANUAL CONTROLLED CIRCUIT BRAKER
| Is This Answer Correct ? | 2 Yes | 4 No |
Post New Answer View All Answers
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
We have a distribution transformer of 750KVA/11kv/440v and an AVR (Servo Stabilizer) of 750KVA on the LT side of distribution transformer. Also we have an ACB of 1200A on the output of distribution transformer (that is on the input of AVR). We want to have an MCCB on the output of AVR. What should be the rating?
PLEASE INFORM ABOUT THE IDEAL TEST RESULTS OF MAGNETIC BALANCE TEST OF TRANSFORMER 33/11 kv DELTA-STAR T/F
What is different between Difnit time and instatous over current relay
Can double compression glands be used with regular cables?
What is mean 2XWY
if in 3-phase system voltage=440V,frequency=60Hz, current=400A. then if it is single phase then current=? and if it is single phasing then current=?
How generator NPS(NEGATIVE PHASE SEQUENCE TEST)TEST WAS DONE? PROCEDURE WITH DETAILS?
How good are you in resolving the commercial issues to Employer's advantage?
What is the formula to calculate a three phase alternator
what is the string efficiency
why we use four type of phase angle difference between pimary & secondry winding of a transformer & where we use them?
how to store the thunder power?
design a LV scheme for a 15 storied building?
Readings of ER300P Trivector meter
