Interested to Buy Any Domain ? << Click Here >> for more details...
for 1cum how much bag of cement is used for M20 grade
- 17 Answers
- 43341 Views
- I also Faced
- E-Mail Answers
Answer Posted / raichand s.
M20 Grade is 1:1.5:3
Total quantity- 1cum
Total mix- 1+1.5+3=5.5
Apply Voids 54% i e
cement quantity={((1*1.54*)/5.5)=0.28CuM
so volume of 1 bag cement is 0.035CuM
Required bags=0.28/0.035 = 8 Bag cement
| Is This Answer Correct ? | 15 Yes | 3 No |
Post New Answer View All Answers
How will drive weight formula for circular cylinder steel bar in kg/ m please step by step drive?
find the discharge of water through a horizental venturimeter having 400mm dia at the inlet main and 150mm dia at thorat.if the diffrential gauge between inlet and thorat shows a pressure head of 25cm mercury. assume coefficient discharge 0.98 and specfic gravity of mercury as 13.6.
What is made from large rocks, which protects the base of cliffs?
how to calculate the dry wt of sand and cement for a required design mix?for ex:M20
what is derating factor in cable? what does it mean if derating factor is high/low in terms of thermal resistivity of soil?
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
Use of coping on terrace wall and in 4" wall is compulsory or not ?
What in bending moment, if a moment is free end of cantilever beam?
Explain what is 1/8 on the architect ruler denotes?
what is that one cub metre plaster in cemant and fine sand
Calculation of Pier Cap with tapper area?
For Wet Mix Mecadam design what is Optimum moisture content
What type of tensile strength is handling by crank in beam? Thanks.
a rectangle grill of length 72 inch x 20 inch width.how to calculate bar spacing ,bar consist 8 mm thickness and spacing of bar is 2 inch.. calculate no of bar with formula
Reinforcement details at hinged joint
