What is Scott connection?
In which device it is used?
- 4 Answers
- 19598 Views
- I also Faced
- E-Mail Answers
Answer Posted / vijay
converting 3-phase to
2-phase transformations or vice versa. generally,2 identical
transformers are purchased as
that they can be interchangeable. This requires an 0.866 tap
on one transformer and a
midwinding tap on the other.
| Is This Answer Correct ? | 26 Yes | 1 No |
Post New Answer View All Answers
An ISP is granted a block of addresses starting with 150.80.0.0/16. The ISP wants to distribute these blocks to 2600 customers as follows. a) 200 medium size businesses; each needs 16 addresses b) 400 small businesses; each needs 8 addresses c) 2000 households; each needs 4 addresses Design the subblocks and give the slash notation for each subblock. Find out how many addresses are still available after these allocations.
magnetizer priciple
describe the Tranformer testing procedure
What will happen to the protection and metering, if the polarity of a single or two PT/PTs in three phase system is reversed? Please provide reference if any.
Why power genaration in India is at 50HZ while America its 60HZ
how to calculate voltage drop and followed by cable calculation?is there avail in formula?
How one can check the MAIN of a house wiring ?
3- What is the target from Zero Impedance, Single Phase Imp., S/C Imp. and magnetic balance tests?
In the magnetic fluxes, what is the role of armature reaction?
1. What is differential relay? How it operates? 2.How to calculate the Short Circuit Impedance in Transformer? 3.What is the alternate solution for testing of polarity by using polarity tester while its milli ammeter does not works? 4. While testing the 33KV Busbar by using Hipot kit, what should be the test voltage we have to apply? 5. What is the procedure/activities to be taken to inject the current more than 2000A by using 2000A Loading Transformer? 6. Explain how you can give the overload setting to any Motor Protection Relay for a HT motors with formula and example? 7. Why restricted earth fault protection is needed? Why can’t differential Protection is sufficient? 8. What should be the minimum and maximum ohmic value for earthing? 9. Why DC Currents are not used in transformer? 10. What is the Frequency while we step up the voltage from 220V to 11KV? Is it possible? Explain it?
what is the clear formula to calculate cable size for a load
what the principle of sincroscope?how it works?when it needed?
How we calculate DC inducation moter Amp? Sir pls give me formula......
1.main parts of generator? what is used A-check,B-check,C- check? 2.what is FM200 system in data centers? 3.difference between pac,ahu?
In TNC switch, is there any 1NO+1NC block ? and if we move over closing position, is ther any affect on trip position or vice versa?
