Interested to Buy Any Domain ? << Click Here >> for more details...
What is cold junction compensation in thermocouples? How is
it achieved?
- 4 Answers
- 11776 Views
- Honeywell, I also Faced
- E-Mail Answers
Answer Posted / zaheer abbas
Open ended through we received TC output as mv
| Is This Answer Correct ? | 0 Yes | 4 No |
Post New Answer View All Answers
What are the error values can accepted in flow transmitter calibration?could u give any formula for this?
IS there any effect of vortex in low pressure side of the transmiter after the orific in feed water line? if yes then what is the calculation?
Why not come out analog output in ABB EL3020 when display show correct value
I want to know about DDCMIS in detail ? please explain it. Also give name of reference books in which it is explained in detail in very simple manner.
WHY THE DEGREE OF VALVE PLUG AND VALVE SEAT IS SLIGTLY DIFFERENT I CONTROL VALVE TRIM DESIGN
line up procedure for dp type flow transmitter?
1.what is the power consumption of three element drum level control in sugar industries? 2.how to reduce that?
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
How is work 5/2 sov?
What you mean by multi stage control vavles?
hey any one got the papers of SAIL and HPCL plz do help me by posting them to my mail ID's naren07_87@yaho.co.in, surenarendra@gmail.com
What are the interlocks we have to check during the start up of LP/HP compressor?
Capacitance, resistance ( colour coding ), parallel & series circuits.
How to Calibrate Flammable gas detector in field
Square root calculation for dp flow transmitter?
