Interested to Buy Any Domain ? << Click Here >> for more details...
Why transformer rating in KVA?
and Generator also?
- 6 Answers
- 13320 Views
- Bhel, IEEE, Toyo Denki, Toyo Engineering, I also Faced
- E-Mail Answers
Answer Posted / deepak
this is because the KVA rating give active plus reactive
power components and the reactive power is associated with
losses of the machines. KW rating tells about the power
being transfered not the losses associated with the process.
| Is This Answer Correct ? | 3 Yes | 8 No |
Post New Answer View All Answers
1.What will be stored in online ups EPROM IC?
A 100KVA SINGLE PHASE TRANSFORMER 10000/200V,50HZ REQUIRES 300V AT HV SIDE TO CIRCULATE FULL LOAD CURRENT WITH LV SHORT CIRCUITED.THE INTAKE IS 1000W.THE % OF REGULATION ON FULL LOAD AT 0.8 PF LAGGING WILL BE HOW MUCH AND THE SECONDARY TERMINAL VOLTAGE ON 0.8 PF LEADING WILL BE
i need previous entrence exam papers of nhpc.
What is the ratio of true power to apparent power in an ac circuit?
what's the requirement of Dy11d0 connection of 3 phase transformer?what's use of it?
what are the advantage and dis-advantage of 3 phase 4 wire energy meter?
Can anyone explain me about the RLC based Impulse high voltage generator and how to and operation of Series resonant High voltage reactor...?
what is feeder bay?
what is meant by twilight switches 7 where its applicable ?
How the setting of the vector surge relay shall be calculated when the relay is to be used for Grid islanding application?
I have a current transformer with 1 main reading meter with transformer outside the building and a control panel having 5 CT reading meters with black round coils inside the building. I want to know, A) when current pass through the Transformers, will the current be reduced or be the same and after that B) when current pass through the CT meters with black round coils, will the current be reduced or be the same. C) in the above process will the reading of the main meter be same or different, from the total reading of all the 5 CT meters.
When a square wave is applied to primary of a transformer then what will be output wave form of secondary ?
I'm generating a pulse of 3V with frequency 80Hz (12.5ms time period) and pulse duration 0.125ms and feeding it to a transformer since i want the pulse to get amplified around 60V. At the output amplification s happening but the pulse is changed to a spike, can you tell me what could be the reason? (an ordinary transformer 220V-12V stepdown transformer is reverse connected ie. now it is 12V-220V stepup and voltage amplification happens)
why single phase to grd test in HV cable?why not 2 phase at a time?
The slip during plugging operation is given by= A 1-s B 2+s C 1+s D 2-s
