Interested to Buy Any Domain ? << Click Here >> for more details...
what are the names of oil used in transformer and its
chemical name?
- 11 Answers
- 28470 Views
- Bhel, CSEB, I also Faced
- E-Mail Answers
Answer Posted / r a m e s h
The oil helps cool the transformer.
To improve cooling of large power transformers, the
oil-filled tank may have external radiators through
which the oil circulates by natural convection
one is
Pentaerythritol(C5H12O4.)
Askarel made from crude petrochemical oil.
| Is This Answer Correct ? | 5 Yes | 3 No |
Post New Answer View All Answers
What is the function of a neutral reactor.
What will be the fault current of any system when its generation is 10% of BASE generation( FUll Load )?Will is 10% or the same as full base calculation?
what purpose to use excaiter in DG.?
What is the difference in calculating size of AC cables compared to calculating size of DC Cables? Usually DC Cables are larger than AC Cables although they have the same ampacity. Why is it?
What is Negative Potential Bias
What is the difference between single point and double point bonding. please kindly detail about bonding of cables.
Explain the purpose of inductor in an electric circuit?
what is meant by twilight switches 7 where its applicable ?
Can any one give an explanation about rating factors of cable? if we are laying the cable on the air with an temp 15 degree then rating factors will be 1.15 and if we are laying the cable on the air an temp 60 degree then rating factor will be 0.76 please describe it and what is the difference between rating factor and derating factor?
what is physical distance of isolator to VCB in 33/11kv sub stations
how a resistor resists to flow the current?how an inductor oppses the sudden change in current?how a capacitor opposes a DC voltage.
What is Phase margin?
Is a contactor (or master relay) required between incoming lines and a VFD? The question goes to safety. If a contactor were used before the VFD and an e-stop engaged then the motor will coast to a stop (i.e. VFD loses power) instead of stopping much faster if the VFD braking fucntion were used. It would make more sense to keep power on the VFD.
What si the d/f b/w KVA & KWH, kvarh & kvar, kwh & kvar phase voltage & line voltage
what is a speed of rotor when we give supply to stator of 50hz and as well as rotor of 60hz of an induction motor?????
