Interested to Buy Any Domain ? << Click Here >> for more details...
say a transformer is designed for 33/11kv step down with
ratio 0.33 for load 1 mva. if am giving 11kv as a input
that same transformer what will happen to its o/p voltage.
and whether it can be operated for 500kva
- 4 Answers
- 5953 Views
- I also Faced
- E-Mail Answers
Answer Posted / k.prakashchandra
The iron losses are reduced to nearly 33 %.As the tr
capacity is based on 'cooling vs heat generated',the
capacity can be higher than 333.33 KVA.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
Hi,I am working in abroad for more than 3 years in a company operating with 11kv and 6.4 MW power. I need c licence in India,can I? some other says only i can get if i work for 2 years in india only! anybody kindly clarify by doubt.Thanks
Scott connection is used for A 3-phase to 2-phase conversion B to achieve higher effciency C to save copper D to reduce harmonics
2 v/500amp/hr to 1.80vpc at 20 degree celsious 2v/5ooamp/hr to 1.75 vpc at 77degree farren .this is the capacity of a battery .what is the meaning of this . can i get a detailed explenation
raleigh method
What was the Dg set radiator and lube oil temperatures trip in ACB
i have flexible wire. size of conductors is 0.190 mm & no.of conductors are 48. then size of wire comes 1.37 sqmm instead of 1.5 sqmm . the what is tolerance for this size.
what is the differences between microprocessor and general purpose computer
I WANT TO INSTALL LIGHTING ARRESTOR ABOVE 20 FEET HEIGHT INDUSTRIAL BUILDING. NOW IT WAS 15 FEET HEIGHT HOW MUCH DISTANCE IT WILL COVER & HOW TO CALCULAT THE DISTANCE COVER BY THE ARRESTOR
hi frenz,its aswathy.i hve aplied for the hpcl test on feb,pls send the test patern & the placement papers as soon as possible. mail-id :kjaswathy@gmail.com
How does "OUT OF STEP" relay ,for Synchronous motor protection, work?
What is Control & Relay Panel? And Remote Control Center?
What is the reason behind current flow(20 A) in amain earth cable of an SMDB? Is cuurent flow(45A etc) through a neutral cable acceptable?
How does a digital electronic meter work??????
In Plumbing services What are accessories we consider for a bathroom?
In our plant we have installed new MCC with ELR and CBCT which is detecting some leakage current in the system but it leading to some confusion when to check that in which feeder which is drawing current we put off the whole panel itself but still CBCT detecting some leakage current so can anybody ans me , where i am going wrong or how to detect whether its actual leakage or CBCT malfunctioning.
