Interested to Buy Any Domain ? << Click Here >> for more details...
how to calculate amount of materials for concreting and
plastering?
- 3 Answers
- 27702 Views
- I also Faced
- E-Mail Answers
Answer Posted / karthi
For 1 m3 of concrete Mix 1:2:4 (M15)
Add 50% for wet concrete = 1.50 m3
= 1.50/(1+2+4) = 0.214 m3
For 1 m3 = 30 bags of cement required (1440/50) say 30 bags
Cement = 0.214 x 30 = 6.42 bags
Sand = 0.214 x 2 = 0.428 m3
Aggregate = 0.214 x 4 = 0.856 m3
Volume = 100 x (12/1000) = 1.20 m3
Add 30 to 35% as bulking of sand = 0.36 m3
Add 20 as wastage of sand = 0.312 m3
Total = 1.872 m3
= (1.872/1+4) = 0.374 m3
Cement = 0.374 x 30 = 10.77 bags
Sand = 0.374 x 4 =
1.496 m3
| Is This Answer Correct ? | 22 Yes | 4 No |
Post New Answer View All Answers
WHAT IS THE MAIN DIFFERENCE B/W HIGHWAYS AND MOTERWAYS?
60-70 grade of Bitumen is VG-30 ?
how do you calculate the quantity of steel,cement for plinth beam. (example size 41'*0.58'*1.08')
How much area, in square meters, will one liter of paint cover if it is brushed out to uniform thickness of 600 microns?
Explain major differences between routing maintenance and major maintenance.
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
How is the strength of cement measured?
what is tension & compression of steel bending.
How much percentage of brick bats allowed in CD-75 bricks
how many material required for brickbat water proofing of toilets.
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
What is the use of array command?
Does degree of bend of rebars has any effect on strength of the member? For example- if a beam is designed with 45 degree bent up bar with respect to architechtural needs and is not 45 in practical so will there be any reduction in the strength of member?
Explain creep?
what is pouring and explain
