single phase for 230 then why three phase are 440 volt
Answer Posted / viswanath
Single Phase voltage = Phase voltage / sqroot of 3
Is This Answer Correct ? | 24 Yes | 13 No |
Post New Answer View All Answers
A 1F capacitor is charged to 100V initially. A 1H inductor is connected accros the capacitor througha a switch. The current in the circiut when the switch is closed is____
what is circuit recombiner and how it is different from circuit breaker
anyone knows service engineer in chennai for EDM SPARKING MACHINE.CHMER PULSE CD 60 M.pL GIVE ANY CONTACT NOS
What is the rating of a circuit breaker needed for 300 kv load in 33KV supply line of 33/415 transformer ? Whether 800/1200 amp vaccum circuit breaker can perform for a 33 KV line in input in 415 volt in output of the transformer ?
Do closed loop systems require manual input?
Please, if 1kw is equal to 1.25kva; how then do I know how many kva in 7.5kw?
What are the symptoms of a bad PG card of a drive (inverter) esp. of Yaskawa Ac Drives (inverters) G7 ?
If a rotary UPS is in line through grid power; What would be the impact on Power Factor if the load through rotary ups is 25% , 50% , 75% & 100%. Will the power factor reduce with less load?
Testing procedure of DG alternator stability test
how to calculate the cable current ratingand and how much of distance the rating will be ok will the distance is incresed what the action we take
When will you multiply and devide with derating factors to the actual value while sizing the cable?
If 100 KAV USP dedicated earth got disconnect / Cut. What will happen at load.
What is the differentional relay...what is the work of this in power Tx. how it is works..
how to calculate transformer load?
Draw a 230kv two-bus bar system showing the following. 1.Two generators (150MW) each connected through one 15.75/230KV transformers 2. 1 outgoing lines 3. Two 230/130 KV transformers 4. BUS PT's 5. CT