Interested to Buy Any Domain ? << Click Here >> for more details...
what is the function of a starter in a motor?
explain RLC circuit.
- 14 Answers
- 76346 Views
- I also Faced
- E-Mail Answers
Answer Posted / raj kamal
starter are generally use to reduce the high initial
current to the safer limit. when we start motor, starting
current is usually 6-8 times the full load current. To
reduce this initial rush of current starters are used.
there are various types of starters are as under:
1. DOL STARTER
2. STAR DELTA STARTER
3. REHOSTAT STARTER
4. AUTO TRANSFORMER STARTER
| Is This Answer Correct ? | 31 Yes | 4 No |
Post New Answer View All Answers
How a capacitor discharge weld power supply works? what is the use of a pulse transformer?
at meter room 50 hrc switch installed,but there are not get earthing proper,so what happen?and 11kv transformer out put going in to hrc main 400a three nog each? so earthing is require for all switch? (some customer made earthing at there home.)
How much inductance or resistance require as a starter in series with induction motor of specific capacity(e.g. 5 hp) ? What is formula for it ?
what happen when power factor of 2 parallely operated transformer become equle?
How to derive detailed design of Suitable bus Bar for 100A for 6.6KV?
what is negative d.c. voltage, why this voltage is used in base transciever station.
in non technical way how can u define POWER FACTOR??
Atwhat condition reverse power relay will act?
a 230v transformer with step down ratio 19:1.it has 2000turns on primary and rated 25va calculate max primary current no of secondary turns volts/turn
How to calculate the External Resistance required for 60HP slipring motor in case no any data of the Motor is available???
Whether it is possible to measure energy at the input of rectifier transformer (12 pulse with very high odd harmonics)
I am B.E.electrical engineer having 7 years of experience in Transformer testing upto 315 MVA.I want to khow how I can get the 'Electrical Valuer' License.
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
what is the voltage regulation for unity and zero power factor?
