Interested to Buy Any Domain ? << Click Here >> for more details...
what is meant by Is limiter?what is the use of current
limiters in electrical ditribution network?
- 2 Answers
- 7399 Views
- I also Faced
- E-Mail Answers
Answer Posted / manikandan iiet student
Is limiter is nothing but a starting current or supplied
current limiter, which is used to limit the starting current
flow through the circuit to avoid the harmful effect in that
like starters, circuit breakers, fuse etc.
| Is This Answer Correct ? | 5 Yes | 4 No |
Post New Answer View All Answers
What is dc current source? Differentiate between ideal and non ideal current sources?
When a single pase capacitor run motor- run on 230vac and Case(1)run with 8 Mfd 250 vac.capacitor , Case( 2) run with 8 Mfd 400vac capacitor. What is difference between both case regarding power ,efficiency etc?
how to calculate the fault in substation
what are the parameters plays a major role in Potential transformer Burden calculation??
IN SINGLE PH TRANSFORMER IF LEKAGE IMPEDANCE DROP IS NEGLECTED ,THE FLUX IN THE MAGNETIC CORE and the lekage flux linking a winding are a)proportional to the applied v to the winding i respectively.
Keywords: Die, Card, Coin, B/N 2 To 12
what is cathodic protection and why it use in industries?
what is the maximum permissible limit value of leakage current and leakage counter reading to replace lightining arrester?
how to check avr of dg set of 125kva
What is the comparison between 30mA DP RCCB and 100mA DP RCCB and can replace it against 63A MCB
How to protect a Dosing pumps/any sensitive equipment (single phase) from surge protection inside a food factory.
What is the difference between electronic regulator and ordinary rheostat regulator for fans?
write encoder 17 pins details? pin a;b+, pin b;w+,..pin s & t. what is the meaning of b+, w+? explain;
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
Factory acceptance test. FAT. For 132 kv transmisstion towers what is that meaning and what are the tests commonly companies perform now days.
