Interested to Buy Any Domain ? << Click Here >> for more details...
1)what is hypo test. 2) which cable need to hypo test.3)
when hypo test can be done before or after glanding.4) what
is the purpose of hypo test.
- 5 Answers
- 38262 Views
- I also Faced
- E-Mail Answers
Answer Posted / k.prakashchandra
It is high potential test. It is done on HV cables
compulsorily.Testing after glanding is mandatory.With this
test, we may know the highest safe working voltage
| Is This Answer Correct ? | 24 Yes | 7 No |
Post New Answer View All Answers
What the formula for calculating no.of earthings & size of earth strip for 100mX90m shop.
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
What is the meaning of 40X8X2 busbar dimensions for carring load of 400 Amps
any one guide me to reduce the power factor of diesel Generator from 0.97 Leg to 0.8 Leg.with out any change in my load.
how did the testing of protection relays done through current injection
Define stepper motor. What is the use of stepper motor?
what is difference between 5A and 100A CT constructional wise and operation?
can anyone show me how the 3 phase power is supplied to socket outlets?
how to calculate mf when meter and cTPT detail are given
why cable i burning without tripping. how can protect led street lights
In constant power region of 3-phase IM torque-speed characteristics, if frequency increases flux A does not alter B decreases C increases D none of above
how to select diiferent power transformers of same capacity on no load loss and full load loss by economical point of view.?
what is the calculation involved to design the heater to heat 10KL of water in temperature control unit?
There is air in a room . the top and bottom of the room are at constant temp. T1 and T2. DRAW THE temp profiles if a. T1 greater than T2 b. T1 less than T2
Why i receive the GCU fault in my DG Sychronization panel . what all the factors considered for this fault .
