Interested to Buy Any Domain ? << Click Here >> for more details...
to improve the existing power factor whether capacitors
have to be added in series or parallel.and why
- 3 Answers
- 6764 Views
- I also Faced
- E-Mail Answers
Answer Posted / ghanshyam singh
as we all know that the capacitor takes the leading current
thus the total current taken by the device also have a
leading current....as generally our load is inductive in
nature, which takes the lagging current, thus the
capacitive current also compensate the lagging current
causing the powert factor to improve
| Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
What are the difference between normal application Transformer and Solar application Transformer?
i have faced a problem in ro plant grunfos make bm30type pump it is 22kw pump. We start this pump using siemens 3rw 4423-ibc44, 30kw softstarter but this soft starter will frequently failier so we planed to change dol starter. So pls tell anybudy its possible or not.
what are the different kind of cables used for transmissions?
what is accuracy ? in any meters , coils accuracy . how can u defined that ?
The SFC of an engine is 0.25 kg/kW hr. when the fuel used has a calorific value of 36000 kJ/kg. the thermal efficiency of the engine is
what are the advantages disadvantages of connecting high voltage block( 1:1 transformers) transformers between the turbo generators and busbars.
What will happen if we on 200kvr capacitor bank(11kv in bus)If there is low load on transformer (1.5 mva 33/11 kv)
What is the maximum breakdown voltage of 11KVA and 66 KVA power line and how it is calculated?
list the type of vfd? wich is sutable for heating kiln?
Explain bypass capacitor?
Advantages/Disadvantages of earthing of neutral bus on MSB instead of separate neutral earthing for transformer/DG sets feeding to MSB
what is the use of expulsition protective gap in 11Kv line.
if we have a industrial load of 400 kilowatts with 415 volt AC then how much total harmonic distortion (thd%) should be acceptable for steady power system.
The transmission does not have options: a)Partition noise b) Flicker noise c) resistance d) Short noise and reason
why we setting 95 deg and 105 deg in wti and oti of distibution transformer ? give the reson for that ?
