Interested to Buy Any Domain ? << Click Here >> for more details...
What is the difference between XLPE & FRLS cables? Is FRLS
cables is a type of XLPE cable or both r different?
- 5 Answers
- 95398 Views
- I also Faced
- E-Mail Answers
Answer Posted / amit khamesra
XLPE means Cross Linked Poly ethylene cables which may be
FRLS or ordinary. FRLS are fire resistant cables which are
used at the locations which are more prone to fire.
| Is This Answer Correct ? | 26 Yes | 12 No |
Post New Answer View All Answers
why the projects getting loss?
We are preparing another project which involves Waste heat recovery from a 1 MW GE Engine. The Engine in particular gives out flue gas at 487Deg C with a flow rate of 5650 kg/hour and this can be cooled to 180 Deg C. This gives a thermal output of ~ 594 KW that is available for input to VAM via heat exchanger / boiler. Additionally 581 KW will be available from engine jacket water (temperature profile 80/ 80 Deg C and a flow rate of 50m3/hr) Our estimation is that 300 TR of cooling is possible with a suitable VAM machine(s). Please advise what is the most suitable arrangement with maximum TR and min Capital expenditure. plz reply me as early as possible
What is the RMS and DFT principle of analogue maesurments. Which way they are advangages. where which princples give optimum results.
what is mean by dual digital protection in the relay field?
PLS SEND THE RRB CHENNAI MODEL QUESTION PAPER my email id is ganesan98655@rediffmail.com
HELLO EVERYONE, I RECENTLY HAVE FOUND ONE PROBLEM, I WAS TAKING NO LOAD TRIAL OF AN HT MOTOR 920 MOTOR , 1440 RPM , 6.6 KV, WITH AUTO TRANSFORMER. AT 450 V, LOAD WAS 40 AMP AND SPEED WAS 250 RPM. BUT AS WE INCREASE VOLTAGE FROM 450 TO 480V, LOAD BECOME 41 AND SPEED REDUCED TO SOME RPM . SO WHICH PHENOMENON ACTED HERE FOR REDUCING SPEED.?? AND IS IT HAPPENING ALWAYS OR IT IS RARE? I ALSO HAVE FACED SUCH PROBLEM WITH FEW LT MOTOR ALSO.
Define active and passive network?
Can any body tell me about INNER SHUNT COMPOUND MOTOR diagram?
what is the transiant condition in alternator? and how it can be prevanted?
In a power conditoining unit (inverter) of a solar plant when we measure the d.c. current fed by different strings of solar plates to inverter, the current in the negative wire is less almost by 1 ampere to the current in its positive wire say current in positive wire 5 A , then current in negative wire of the same string is 4 A. Since the current entering should be equal to current leaving then why the current is noticably less in negative wire.
how to calculate units consumption for a 12 hp motor /hr.
What is the maximum breakdown voltage of 11KVA and 66 KVA power line and how it is calculated?
What is the maximum number of swithes that can be connected in series up to down stream point in an LV Distribution system?
In Designing the rating & accessories of a MCCB how to choose the type of releases..means what is the basis for selecting, thermal magnetic, electromagnetic & microprocessr based releases
I have c license but I don't know eligibility of Max Kilo Volts under the electrical licensing board.
