Interested to Buy Any Domain ? << Click Here >> for more details...
What is the Difference Between MCCB & ACB & VCB
Answer Posted / sapan tirkey
mccb is generally used for 100A to 1000A (LT)415v
ACB IS USED WHERE CONNECTED LOAD RANGE IS 1000A AND ABOVE
(LT)415v
VCB IS USED IN OUTDOOR CKT HT SIDE i.e 11kv 33kv 132kv and
above
| Is This Answer Correct ? | 16 Yes | 4 No |
Post New Answer View All Answers
why the electrolyte level in lead acid battery is maintained 2.5 cms above electrodes?
What is Percentage impedence of a transformer? why it is expressed at a percentage? what is the importance of percentage impedence in case of a transformer?
When we use air circuit breaker, it has O/L protection ,time delay SC protection, Instataneous SC protection & ground fault protection. They all have some setting range. But what is the suitable/allowable setting for the above protection which will be safe for the equipment? For example-O/L protection setting have a range of (0.4,0.45,0.5,0.55,0.6,0.65,0.7,0.8,0.9,1.0)xIn Time delay SC protection have a range of (1.25,1.5,2,3,4,6,8,10,12)xIn Time delay setting is 0.02,0.1,0.2,0.3,0.4 Instataneous setting is fixed to 20xIn Gound fault setting is given 100A,300A,600A,900A,1200A This setting are for 2500A ACB. So what will be the basic allowable setting for the above protection? is there any formulae to calculate this<
Why is the air gap between the pole pieces and the armature kept very small?
how we decide the require size is this for a known current at fuu load?
What is Tachometer used to measure?
what is the difference between circular wdg & ractangular wdg?
what do you mean by every IC 74 first digit.why are you using this no.why not using another no.
Why Ac Systems Are Preferred Over Dc Systems?
What is the effect on Power factor and capacitor when your company load is more than 70 % of welding transformer
which type of amplifiers are used in multimete?
I am inpecting a 10kVA UPS what tests should i do and should i observe?
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
why constant voltage transformer should be start without load? and if started then what will happen?
my diploma certificate in my higher education college
