Answer Posted / shakti
It is the grade of the cement i.e,it implies that the
strength of cement achieved after 28 days of curing will be
43mpa & 53mpa respectively.
| Is This Answer Correct ? | 59 Yes | 1 No |
Post New Answer View All Answers
what is difference between NP2 NP3 NP4 CONCRETE HUME PIPES USED AT SITE
What is the strength of 1:6:12 mix?
What the advantages and disadvantage of using 90mm and 100mm bricks for a wall of a house? Thanks for any input.
what is the difference between replacement of cement by groundnut shell ash
How to find weight of steel in kg if we know the area which is in m2? Following details are known to us, Area=125m² thk of slab=250mm Steel details:T12@200 PS:considering mesh top and bottom with X and Y direction
what is m30 in concrete tiles
HOW TO CLACULATE CEMENT AND SAND CONSUMPTION FOR THE STAIRCASE KOTA FLOORING IN THE RATIO OF 1:4 50 MM THICKNESS
what is the weight of 10mm,20mm,40mm aggregate
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
Formula of area of crane hook
what is the difference between tsp & tower
Pile height is 4.3m. 2nos. under reammer. bulb nose is 75mm and height is 400mm. pile dia is 375mm and overall dia 940mm.pls. help to calculate concrete in pile and bulbs separately. What is formula for bulb volume calculation ?
What is the purpose of Chipping in the heavy foundation?
Test procedure of fly ash bricks as per code ?
do we decide reinforcement steel , based on bending moment ? give example with continous slab?
