Answer Posted / aravinth
To steady the electrical and electronics circuits
Is This Answer Correct ? | 4 Yes | 1 No |
Post New Answer View All Answers
what is the Transformer Impedence?How can calculate?
Can any one give an explanation about rating factors of cable? if we are laying the cable on the air with an temp 15 degree then rating factors will be 1.15 and if we are laying the cable on the air an temp 60 degree then rating factor will be 0.76 please describe it and what is the difference between rating factor and derating factor?
Can you used moeller lzm1 mccb in a dc system with 125vdc and 20ka short circuit current , beside is it have 24 or 48 volt shunt ? Beside how long current can through from An MCB shunt contacts? (like Z7-AS 24 V)?
how is positive, negative, zero sequence is happen.. how is effect on 3 phase system
For RCD (Residual current device) Icu is defined. How i can find Ics for them?
what is the mechanism of operation of brushless dc motor why is it more wexpensive then ordinary permanent magnet motors
what is the benefit of floating our DC source? if i have two floating DC source of which 1 has a ref voltage of -21VDC and the other of -18VDC. can it be connected in parallel to share a common ref voltage? if not, how do i make both sources to be of common ref voltage? tks
What is the feedback in the control system?
how power is generated,and transmitted to our home..pls explain briefly in simple words.
what is meant by surge? what we called for high currents?
From reading, Under voltage relay used also as phase sequence relay now, Why I use under voltage and phase sequence relay in the same circuit (ATS)?
A 400 V, 50 Hz, Δ connected synchronous generator has a field reactance of 0.1 Ω and armature resistance of 0.015 Ω. At full load, the machine supplies 1200 A at 0.8 pf lagging. Under full-load conditions, the friction and windage losses are 40 KW and the core losses are 30 KW. What is the machine’s overall efficiency? Ignore any field circuit losses.
A 2083kva AVR was tested, phase to ground shows continuity, what is the implications
What are approaches to tackle sedimentation problem of reservoir?
what is kondo syatem in eletrical traction