Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / johnringson
Below 1 ohm.
| Is This Answer Correct ? | 10 Yes | 1 No |
Post New Answer View All Answers
WHAT IS SUBSTATION & ACCORDING TO VOLTAGE HT,EHT SUBSTATION EXPLAIN IT
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
What is precision of a measurement?
A 1F capacitor is charged to 100V initially. A 1H inductor is connected accros the capacitor througha a switch. The current in the circiut when the switch is closed is____
how can i reduce sparking without stepdowning the voltage
As we know induction squirrel cage motor torque Directly praprortinal to applied voltage in star connection & delta also. If I connect 55KW Motor to DOL starter in load condition does motor withstand the load & what will be the current withdrawn ? motor will not fail ?
What are the characteristics of negative feedback?
What is the difference between diode and a transistor in terms of the direction of current flow?
How many double suspension hardware fittings are required on a double circuit transmission tower?
what is servo motor and how it works?
Who many reason of ignition fail ?
ROC converges if pole and zero lies inside a) origin b) z=1 c) pole d) zero ? Explanation please? if ROC does not converges then?
As per standard, transformer body earthing and other Equipment earthing (Equipment earthing) did not connect. but in LT side termination we are doing metal glanding in both side Transformer to PCC Panel through armoured cable, now X'mer body earthing and PCC Pane earthing (Equipment earthing) both are connect.is this safe for X'mer or other equipment?
explain which quantities change in the starting and the and the running condition in induction motor
what is the acceptable value of TAN DELTA and dissipation factor for 11kV, 1.75HP Motor?.
