Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / hitesh gohil
An open delta connected when full power is not needed.
| Is This Answer Correct ? | 16 Yes | 13 No |
Post New Answer View All Answers
An 8 pole, 50 Hz, 3-phase IM is loaded to a poing where pull out torque will occur. The rotor resistance per phase is 0.3 ohm and motor stalls at 650 rpm. The rotor reactance at stand still is A 2 ohm B 1.25 ohm C 3.15 ohm D 2.25 ohm
we can run 2phase as 3phase .what will be the differnce with respect to phase angle, power, current between the two modes
A 230V dc shunt wound motor has an armature resistance of 0,15Ω.When operating on no load at 650 rev/min the armature current is 6A . The motor takes a full load current of 85A. Calculate the full load speed if the field flux is (i) maintained constant (ii)reduced by 0,03
We have 250 KW x 2 motors, which are load from 25% to 100% varying load in every minute , so how can we compansate the power factor. pl give your opinions on the above subject.
What is purpose of reactor?.What is different between line and bus reactor?
he compression ratio for a petrol engine generally lies between
What is a copper loss or i2r loss pc?
How does a tertiary winding filter harmonic(espcially 3rd one) from entering into load system?
which one is more efficient, torq, power & ecnomy with the same frame size AC motor / DC motor?
Explain Circuit Breaker Trip Characteristics in detail.
what is mean by PIR in circuitbreaker and give me detail of that?
What are the advantages and disadvantages of closed-loop control system?
Metal covered multiconductor cables shall employ a marker tape located within the cable running for its complete length in lieu of cable surface marking. Is it true or false?
why US countries maintains 110v and 60HZ
To prove the capacity of a 10MVA transforemr with 6.5% impedance by a short circuit test how much power is needed to inject an impedance voltage if we have to arrive for its rated current?
