Interested to Buy Any Domain ? << Click Here >> for more details...
what is on line transformer and off line transformer.
- 3 Answers
- 8294 Views
- Cisco, HP, ICC, I also Faced
- E-Mail Answers
Answer Posted / sunil ulange
ya definitely above answer is correct..
But they asked question like this instead of ON LOAD TAP
CHANGING TRANSFORMER & OFF LOAD TAP CHANGING TRANSFORMER ..
| Is This Answer Correct ? | 5 Yes | 0 No |
Post New Answer View All Answers
in our all power plant have connected in grid and grid voltage and plant voltage is same, but as per as electrical concept the power will transmit from high potential to low potential but here altough same,then how power transmit from power plant to grid.
what are the industrail measures to over ferranti effect? how would the ferranti effect the power system if those remedial mearsure arent taken? how often does this effect occurs in real power system?
how many single tension hardware are required on a double circuit transmission tower?
What happen to generator if i have unbalanced load?
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
what is differant beetween overload current and phase current?
What is a Phase shift meter? Where can I get one?
electromechanical relay type identification example : type=tjmh t-stants for j- m- h-
How to calculate the External Resistance required for 60HP slipring motor in case no any data of the Motor is available???
What is the use of bundle conductors?
What is T’Q and X’Q and X’D ? and what is saturated as well as unsaturated ?
how you will decide the distance between the power transformer and its fencing
Why lose 1 phase voltage in 33kv to 415v stepdown transformer
CAN WE CALCULATE THE NEGATIVE SEQUENCE AND ZERO SEQUENCE REACTANCE OF A GENERATOR USING ONLY ITS RATED VOLTAGE, KW, PF AND SYNCHRONOUS REACTANCE??? IF YES, THEN HOW??
What is the difference between rulling span and wind span of of an Over Head Transmission Line?
