What is the difference between MCCB and MCB ?
- 4 Answers
- 8527 Views
- Siemens, I also Faced
- E-Mail Answers
Answer Posted / rajesh
MCB = Miniature Circuit Breaker, used for domestic, light
commercial and light industrial applications.
MCCB = Moulded Case Circuit Breaker used in heavy commercial
and heavy industrial applications.
And as stated above fault current rating is greater, generally
much greater with the MCCB
| Is This Answer Correct ? | 19 Yes | 4 No |
Post New Answer View All Answers
sent to a site and asked to explain how you would like a twenty seven flour building should be supplied with lighting and sockets plus a water boiler.
need to make a report. Need to choose a 3phase induction motor. Load conditions motor will operate in : Maximum Load: 30 Kw Speed: 2950 rpm Ambient temp: 20 cent Supply voltage: 440V Frequency: 50Hz need to look for the safety factor when choosing the motor, went through catalouge found a few, but dont know how to choose the safety factor allowing an extra load something above 30 KW to avoid any harm.
Why in 6 KV XLPE cable termination kit used and why not in 380 V xlpe cable same is not used
Do closed loops systems require manual input?
in Contactor opearation Why there is a difference in the values of the operate and release voltage in case AC supply
gas turbine genrator reactances
When we use air circuit breaker, it has O/L protection ,time delay SC protection, Instataneous SC protection & ground fault protection. They all have some setting range. But what is the suitable/allowable setting for the above protection which will be safe for the equipment? For example-O/L protection setting have a range of (0.4,0.45,0.5,0.55,0.6,0.65,0.7,0.8,0.9,1.0)xIn Time delay SC protection have a range of (1.25,1.5,2,3,4,6,8,10,12)xIn Time delay setting is 0.02,0.1,0.2,0.3,0.4 Instataneous setting is fixed to 20xIn Gound fault setting is given 100A,300A,600A,900A,1200A This setting are for 2500A ACB. So what will be the basic allowable setting for the above protection? is there any formulae to calculate this<
what is class of SPD and dittels of all class ?
What is 11 N1 and 12 N2 in single phase Transformer ?
What is minimum phase system?
what is the difference b/w pvc cu conductor and cu breaded wire..?
what is integrated ac contact circuit
what is metering cum synchronizing panel and how it is used?
Which types of gate insttaled in static switch. Please give me answer.
We have received supplies of the ordered material. payments against the supplies also released. Where ST paid 4% against form C. Meanwhile it has been observed that 25% of material supplied was defective. Please suggest whether the issuance of C form from our side would be stopped till settlement of liabilities.
